How to program a hot-line

[baldanondo]

Hello,

We have BC-11 and we would like to program a analogue extension like with the hot-line functionality.

That is:

When an authorized user is going to use the phone, he will be able to call any destination.

When a not authorized user is going to use the phone, we need that the extension will ring automatically a programmed destination number and that that user won't be allowed to call any other number.

Thank you very much and regards

 

[vdMerwe]

Hi,

Use a delayed hotline, than a person with an authorisation code can make a call and a non authorized person will be forwarded to the programmed destination.

This programming is all possible within Extension Manager

Harold

 

[baldanondo]

Hello,

Thank you for the indications. But could you tell me which are the commands needed to program this functionality?

Regards

 

[rfpui]

To program a delayed hotline use

SPEXI IR=..., OPT=D,NDC=......;
Where
DIR is extension number
NDC programmed destination number

And check
PARNUM=182 Length of delay time in Delayed hot-line

The parameter states the maximum time when an extension, defined as a Delayed hot-line, has to start dialling. On time out the call is automatically set up as a hotline call towards a predefined destination.

PRVAL value 2-16 in seconds