CIL in Incoming Traffic

[MD6]

Hi,

I Have one md110 bc9 with tie-line cas. I receive the condition code "I" or "NI" when call for md110. If calls is reroute for tie-line cas the condition code is not receive.

Example 1:
The extension 1645 is the md110

03202112 0023 I 1645 5868486466

Example 2:
The extension 2580 is other pabx (tie-line cas)

03202033 0001 20 2580 5868486466


In the example 2 i´m not receive codintion code "I" or "NI".

I´m sorry for my bad english.

Thanks,

 

[vdMerwe]

This is correct, outgoing calls do not have a conditioncode. (except calls via LCR)

If you want to make a selection to see what the traffic is over the CAS you can use Trunk or Accesscode

This is a copy from Alex:

Condition code (type of call that consists of one letter):

( ) Outgoing call
(A) Call handled by PABX operator
(D) Extremely long call duration
(G) Call has been connected with alternative route selection
(H) Recall to route
(I) Incoming call or tandem call
(J) Internal call
(L) Conference call
(M) Least cost routing
(N) Dialled party not equal to answering party
(Q) Malicious Call Trace
(R) Intrusion
(T) Transfer call
(V) Data call
(W) Call terminated due to route optimization
(X) External follow me
(Y) Call established due to route optimization
(Z) DISA call
Condition code (type of call that consists of two letters)

(VJ) Internal data call
(VI) Incoming data call
(VO) Outgoing data call
(DO) Long outgoing call
(DA) Long PABX operator extended call
(DI) Long incoming call
(DJ) Long internal call
(DV) Long data call
(DX) Long external follow me
(NJ) Dialled party is not the answering party on an internal call.
(NI) Incoming DID call when the answering party was not the dialled party.
(CI) Abandoned non-DISA call
(CZ) Abandoned DISA call
Condition code (type of call that consists of three letters)

(NCI) Abandoned non-DISA call, dialled party is not the answering party.
(NCZ) Abandoned DISA call, dialled party is not the answering party.

 

[MD6]

Hi,

Example 1:
Incoming Call -->Public CAS(TLU76)-->MD110 Extension (1645)

Example 2:
Incoming call -->Public CAS(TLU76)-->MD110 PABX -->TIE-LINE CAS (TLU76)--> Extension in other PABX(2580)

The dest of Tie-line cas is 20.
I´m not set clinp with dial = 20. I´m set only orig 010101-010131(public cas)and dial=all.

 

[vdMerwe]

Hello MD6

What is exactly the problem? Instead of the condition code you can use the accescode = 20 mentioned in the string:
03202033 0001 20 2580 5868486466

Because the orig is the incoming route you are sure that this is a Trunk to Trunk call

Harold

 

[MD6]

Hi,

Yes, this is a trunk to trunk call. See that extension number(2580) and incoming number (5868486466) is reverser order.

I need recorder incoming call when incoming call go to other pabx with tie-line cas.


Sorry for my bad english.

Thanks