Unknown condition code's

[vdMerwe]

When analyzing the CDR's i find two condition code's i can't find in the documentation.

NA and NT are not discribed but in case of the NA code it appears quit often.

Who knows what these code's mean?
My system is a BC10 with CNI142.

Harold

 

[patcher]

I dont get your explanation. //patcher

 

[vdMerwe]

The condition code is the key element in the call record. It designates the type of call that was made.

Typical condition code's are for example:

(A) Call handled by a PABX operator
(I) Incoming call or tandem call
(J) Internal call
(NI) Incoming DID call when the answering party was not the dialled party

etc.
a complete list of these code's you can find in Alex under Extra Facility Description - Call information logging

So, in my CIL-data i find two code's, (NA) and (NT) which are not mentioned in Alex.

Harold
(

 

[LCTMP]

(NT) Dialled party is not the answering party on a transferred call
(NA) Call handled by PABX operator

I think this is correct for what you want

 

[vdMerwe]

Thanks,

(NT) looks good, is in line with the other Nx code's
but (NA) Call handled by operator is the same as (A)?

Mayby is (NA) - Dialled party is not the answering party on a transferred call from the operator.

I will test this first thing in the morning