Search results for query: *

I can wait, no problem. Can VMPro check conferences in R5 or is it done in some onther way?

Hi, main issue is to limit number of participants in each conference. Even if 10 people knows the pin I only want 6 to be able to join the conference in sametime. Maybe it can't be done.

Hi, is there away to limit number of participants to a conference without using conference center? Maybe if you can limit number of active calls to a specific number will do the trick, but I don't know if you can do that. Maybe VMPro can help but I can't find the solution. Thanks

Maybe the extensions are still there after you have removed the unit, remove the extensions then and reboot.

How are the ip trunks setup? Older sw required mesh topology but latest sw requires star topology.

Hi, if you enter address 192.168.xxx.xxx to a IP Office and ip mask 255.255.192.0 you get a warning, this is not a valid ip mask, should be 255.255.255.0. I know this is not a normal ip mask for that ip address but is should be allowed to do. There is a couple of strange issues if I enter this...

Think you setup Delta server to e-mail that config if it loose contact with IP Office

Delta server has a copy of the config. You could copy that file.

Have you restarted CCV after restarted Delta server? If you try to add an agent in CCV, does it list all agents? In Delta server, does it show all agents?

Think it will say undefined if you change name in IP Office, then you will have to delete it from CCV and then put it back again

Nothing in event log. Problem solved by reinstalling Contact Store but don't know what caused the problem

Hi, firewall is disabled at this time.

Hi, server is only for VMPro, Contact Store and TFTP server ( MV_iptel).

Hi, have a Contact Store where the service won't start. Have worked and it seems that everything is ok, but the service will not start. Is there any Windows security or other thing anyone knows of that can cause this. Thanks

When using remote access and the IPO has DHCP set to dialin it gives the remote access it's own ip adress +1. If IPO has 192.168.42.1, then remote access will have 192.168.42.2. If voicemail lite pc have this ip address then this can happen.

Believe you set DbgOut.txt file size in regedit. Default is 4MB

Think Voicemail Lite on IP 500 requires profesional license. Could that be the problem?

When you use fax you have to turn T.38 off in MP-112, IPO does not support T.38. When I use MP-112 I use ip trunks and for extensions I use ip-endpoint license Works for me

Had this issue once when Phone manager was in autostart. Had to start it with a cmd-file located in autostart and that first command was to wait 30 s. Think there is a timeout issue, phone manager don't get an answer in time and therefor says unlicensed

Have seen this a few times, the * to program disapears. Never manage to figure out what happened and never solved the problem. Had to get a new phone. Try start a case with Avaya or send it back to them.