Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

wrong code loaded

Status
Not open for further replies.

V98Cubes

Vendor
Jan 17, 2008
50
US
I seem to have managed to load code on a 16 digital module for a 32 digital module. This was done during an upgrade of the module. I did not notice the system was seeing it as a 32. Now it is dead. How can I load the correct code if this can even be done.

Thanks in advance....
 
Hey Thanks that got my ds16 back to green. Next problem is I have 4.2 loaded on the ds16 and I am looking to add it to my 406v2 running 5.0. The main system does not seem to recognize it. I have rebooted both units without help. Am I missing something trying to upgrade the expansion mod to 5.0?

Thanks,
V
 
Do you have your standard to pro license still in ?
Remove it if you have and see what happens :)


RTFM.gif



ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
IPO406v2 I did not think I needed a pro license for this. A little back ground, There use to be a ds32 which the system still thinks is there. Now I wanted to place a ds16 in it's place. LED green and flashing on exp mod. Upgrade option never sees the exp mod at all.

??????
V
 
True, i am not paying attention :)
Remove the DS30 in the system and reboot it
Then it probably will work

RTFM.gif



ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Downgrade your 4.6 to 4.2 and try then
Maybe it is a 5.0 bug ?

RTFM.gif



ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Maybe the extensions are still there after you have removed the unit, remove the extensions then and reboot.
 
You could also try defaulting your config - just to verify that it's nothing about how you're configured.
Mike
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top