Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fax on AudioCodes MP112 connect to IP500 4.2.4

Status
Not open for further replies.

Bas1234

Technical User
Dec 10, 2007
6,760
NL
Hello,

We want to connect an AudioCodes MP112 to an IP500 (4.2.4).
It's possible to call in an out on the AudioCodes, but the fax will not get connect.
Turned off V.34 on the fax, we're using G.711 and on the IP500 we have a valid IP EndPoint license. The ip extension has the following options ticked.

- Enable Faststart for non-Avaya IP Phones
- Fax Transport Support
- Out of Band DTMF
- Local Tones

Has anyone got this working?

thanks in advance

Bas

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
If you look in monitor, do you see a registration error ?
Whe tried to connect a 4690 and it just does not register on 4.2.4 even with the ip endpoint license

Can you try on 4.1.15 and see if that works ?


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
When you use fax you have to turn T.38 off in MP-112, IPO does not support T.38.
When I use MP-112 I use ip trunks and for extensions I use ip-endpoint license
Works for me
 
Got it working now, the only thing on the extension that needs to be ticked was enable fast start. The rest of the settings had to be done in the AudioCodes.


Thanks for your response

Greetzz....Bas

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
Bas,

Did you get both ports on the MP112 registered as an H323 extension?
I've tested a similar setup but couldn't get more than one port on the audiocodes registered with the IPOffice as an H323 extension (yes there were multiple IPendpoint licenses).

 
Just installed with one port, also because of just 1 IP endpoint license. Maybe next time i could test in our Lab.

I'll let you know, have a nice weekend.

Greetzzz...Bas

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
Yes just ONE MP112 on site "B" that is connected over VPN to a SOE on Site "A" with a 1 IP End-points License.

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
Please post if you ever get the 2nd port working later. I'm looking to get rid of my analog cabling infrastructure and go with these type of devices to connect any cordless phones/faxes in our plant.
 
Somewhere around the €140,- / 175,- US Dollars.

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top