Search results for query: *

Hi Radero0000, i do have the same Problem. How did you fixed it??

At the UCM Ip adress you get automatically populated the T-Lan Adress. Type in the E-Lan adress for UCM instead of the one you get from system and then continue with typing in your admin user credentials you created for UCM. If you are not able to type in a different IP-Adress you need to apply...

Hello, does anybody has a clue about the UEXT Programming for a 3rd Party Phone?? I can not find any proper description in the NTP`s about SIP3 UEXT programming. Any help would be appreciated! Best Regards, Michael

Hi, you are able to do a direct upgrade from 2.02 (2.01.27.05) to 5.0. Your 2.02 System must have minimum SU04. Just run Upgrade Wizard on your new 202i with Rel. 5.0 installed as described in CallPilot NTP NN44200-400 (Upgrades & Migration Guide). All your data (Messages, Greetings...

We found out why the SigServer was not addable to the node. The specific SigServer was defined as backup Server for the Security Domain. After demont him from the security domain and set it as a member server we were able to add him to the Node and the 2nd SIP-GW is now working fine.

Hello nikeair, first of all many thanks for your answer! In total i have 3 CPPM Cards at this site. First one is deployed co-res CS+SS+NRS+EM, this one is configured in Node 100 and has the GW configuration for SIP-Dect. Second one is deployed with only SS. I created a new Node 101 but i am...

Hello everybody, we have a new installation of a CS1k Rel. 6.0 right now. This one is sold with SIP-Dect and SIP-Trunk to the Provider (instead of E1/T1). SIP Dect is working fine but it seems that it is mandatory to have this configured in SIP-Line and SIP-GW area of the node. For my SIP-Trunk...

Hello all, i try to upgrade a 11C (CSE1000M) Rel. 4.5 from Fibre connection between the Cabinets to Survivability with 100BaseT connection. From another thread i understand that i have to connect the IP-Daughterboards from SSC of the Main Cabinet direct to the Daughterboards on the SSC`s in my...

Have you checked the System Event Viewer of CP?? If there is a DCOM Error 10009 while you try to connct your Applicaton Builder then try the following at your client machine: 1. Select start > run > dcomcnfg 2. Select component services > computers > my computer 3. Right-click and select...

@GHTROUT, That will not work in my Case. I have a number 8880 which is an DSC. This is routed to an ACD Server for monitoring and comes back from this Server to my Phone Key 0 which is now number 1108880. If the person on the Phone uses Key 0 to make a internal call it would be great to have...

Hello all, i have a 7-digit SCR-DN on Key 0 of my digital set. If the set makes a internal call using Key 0 i would like to send a 4-digit Clid for this. Any ideas how to manipulate internal clid?? Thanks and best regards from switzerland, Mike

I had the same problem a while ago. I`m not really sure but i think after a reboot of the Server the command came back to work. Best regards from Switzerland, Mike

Nortel comes out frequently with SECPeps which includes all the Microsoft Hotfixes which are verified from Nortel for CallPilot. Don`t install any Hotfixes you got direct from Microsoft!!! Best regards from Switzerlan, Mike

If you have a Rel 5.0 CallPilot which is running on W2003 you have to configure the OS Routing and RAS Service to bring the modem up. Best regards from Switzerland, Mike

I had a bad UPS a couple of weeks ago and this one switched off the power to M1 and brought it back after a few seconds. It was also once a day. If you are able to take a look at the debug logfile you should see the reason for the reboot. Best regards from Switzerland, Mike

Try to add UUS1 at RCAP in d-channel. for this change you need to disable dch. Best regards from Switzerland, Mike

if you want to build a extension which is in another switch, just define a RLB in LD 86 and enter the route number to your asterisk as Entry 0. then go to LD 87 and define your asterisk extension as DSC and point it to your new built RLB. i have no idea what you have to program in the asterisk...

Hello BellWest, i had a issue like this (i am not really sure if it was rel.3 or 4) and we had to bring in the firmware using a tftp download. best regards from switzerland, Mike

Do you have your RAN Route defined as Type AWR?? Is your RAN Route Number added in AWU Data Block?? Best regards from Switzerland, Mike

we have C6E as Firmware on the Phones.