Search results for query: *

From what i know alarm 3 isn't to be ignored. 1 is lowest priority and 3 is highest . So i will follow up on the type 69 alarm . Thks

Thanks both . The modem is enabled (and has been operative for 8 years) Just suddenly stopped working one day ,without any user invension. And system has also been restarted . Will try @MODEM DIS followed by a @MODEM ENABLE just in case it magically starts working again . Syar

Hi folks ! Does anybody with newer Installation & Maintenance doc have the possibility to look up this error code in the hardware error table , and post it. The type error is not listed in mine ... TYPE SLOT CHNL PRIO DATE TIME #BAD DATA1 DATA2 DATA3 DATA4 69 05 00 3...

I'm not retired . Just been out of business caused by a long sick leave during 2004. I'll check in from time to time from now on [wavey2] . Thx for the nice post Regards

Hi there ! I have struggled with this before . If you have used tuneup utilities 2004 to optimize system you should reset the LargeSystemCache back to default (0). In registry: HKey_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement key :LargeSystemCache Change...

I have ATI radeon grapics and in the advanced display settings there is a rotation option to 180 degrees (witch becomes horizontally) . This made the same thing happen for me. Setting it back on landscape 0 rotation fixed it . Check for something simular on the users graphic properties. ...

Example : PELPI:DIR="1001",LIST=1,CHO=1,ANSPOS="1001",TIME=12,BSYCHO=2; bsycho(busy choice) redirects to CHO 2 in the list when anspos in CHO 1 is busy. PELPI:DIR="1001",LIST=1,CHO=2,ANSPOS="1002",TIME=12;

It can be variable disturbances from ground or something . ...

Perhaps it's programmed as RID . srad ! Is it PELPI programming on these numbers ? ... ...

Forgot ! To remove use PELPE:DIR= ; ( removes all lists for the directory number ) or PELPE:DIR= ,LIST=1,CHO=3; (remove one choice in the list #1) or PELPE:DIR= ,LIST=1; (remove list#1 if multiple lists is used) Syar

Hi srad ! yes in bc10 you can have cho=(1-5) PELPI:DIR="Freeset",LIST=1,CHO=1,ANSPOS="Freeset",TIME=12; PELPI:DIR="Freeset",LIST=1,CHO=2,ANSPOS="Analog",TIME=12; PELPI:DIR="Freeset",LIST=1,CHO=3,ANSPOS="Analog",TIME=12; PELPI:DIR="Freeset",LIST=1,CHO=4,ANSPOS="Analog",TIME=12...

mdman ! From where is this .. ? "QSIG-Path Replacement in BC11 sp13" Networking enhancements: Support for standard QSIG-Call Forwarding, QSIG-Call Transfer and QSIG-Path Replacement, and UUI transport in QSIG GF messages. You have to include it in parnum 223 .

Note that ! Theese are ECMA Q-Sig parameters. Note For BC11/12 only ! For ISO Q-Sig Change the VARI D1 to 7 . VARI D4 to 4 (with General Protocol Updates) VARI D1 set channel numbering as 1-30(7) values(4-7) User-user tunneling through in generic function protocol. VARI D1 = 7 ( Supp...

I want to Enable access2 whether internal or External calls received without using ODN2 key! Is it Possible? Yes , almost ! Set the extensions serv D7D8 to minimum 06 . KSCAC:DIR= ,SERV=xxxxxx06 And make the route generate call waiting ROCAC:ROU= ,SERV=3xxxxxxxxx; Internally will never be...

This is the description of the parameter , i think it describes it well. The parameter states that the entered answering position can only be called once while the call is being distributed. When the parameter is set to NO, the selected answering position can be called as many times as the...

What is a jump group ? How is this programmed / configured . Some printouts would have been nice . Never heard of it . Syar

Hi there ! Well the first i see is that you also must add this to ANS. ANSSEC : The number of calls answered by a secondary PABX operator Syar

Poor guy no help yet . [neutral] I the lack of responce is that DPNSS MD network service as a cdini is only is fully supported between md's . Use PELPI instead to acheive your wanted diversion . Syar

Glad to help , thanks . Syar

Maybe the rerouting/alt.routing in MD A or B picks up the call since the time exceedes 30secs just on cho1&2. Try to disable the SEL=X..... in MD A and B on the routes involved .And the SIG=........X...(if eq=1 ). If i5499 is idle it rings 15 secs on 1725499 then 15 secs on 07019871 ,then 6...