Log file alarm raised by MD110 everytime you login

[rokane]

Can anyone pls tell me what's causing this problem? The problem started when I added subfs files...syssubfs12& syssubfs22 on the sysdisk1 hardisk. It use to have 2 subfs files only(syssubfs11&syssubfs21) but since we added more
lims( total of 14 lims)we have to add additional subfiles.
The system is dumping perfectly except for the log alarm raise by the system everytime I logon to the MML terminal.

rokane

 

[rokane]

The alarm code raised by the system is 119 - Failure to log Event Data.

 

[SYAR2003]

This is the io log , and have nothing to do with
2 or 4 subfule system .

Just make a restart of LFM in lim1 to get it started
again.


....

 

[rokane]

Hello SYAR2003,

How come this problem is not present when the system was only 12 lims? It only appears when we added two more lims.

I will follow your suggestion to restart LFM & will let you know the results.


rokane

 

[SYAR2003]

Perhaps to low diskspace .
Remember that you made an INL dump while
adding lims .

....

 

[rokane]

Thats right I did an INL dump & followed every instructions given by Ericsson in which the last one
is to upgrade the NIU board to latest revision but
sad to say, the problem is not yet corrected.


rokane

 

[SYAR2003]

Try this .

Stop the io logging : IOELE

Remove the files
Print first: FIDAPATH=/SYSN/USR1/SES/IC,OPT=ALL;
Any files there :
Remove them : FIDIEATH=/SYSN/USR1/SES/IC/*.*;

Restart LFH and LFM
Print the locations
CNPIP:UNIT=LFH;
CNPIP:UNIT=LFM;
Restart them in the lim(s) they are located
RFPUI:UNIT=LFH,LIM= ;
RFPUI:UNIT=LFM,LIM= ;


Start the io logging again : IOELI; or IOELIRINT= ;


.....

 

[rfpui]

Rokane
Have you BUFREQRES error in hisory log (HIMDP)?
Is yuor system BC11 sp10?

 

[rokane]

rfpui,

I will check this one onsite this coming Monday if this history log is present. The system is BC11 SP9.


Syar2003,

I will also do what you suggested this coming Monday & let you know what happen.

 

[rokane]

rfpui,

There is no BUFREQRES error in the history log.

 

[rokane]

syar2003,

Thank you for your advise, the error log is now solved. RFPUI is what it needs to make the problem disappeared.

once again thanks!


rokane

 

[SYAR2003]

Glad to help , thanks .

Syar