Search results for query: *

Thanks for the help. Wayne

Thanks for the info. Wayne

Thanks for the help guys. Wayne

Does anyone know of a digital conference for this system? I have a customer who does not want to purchase an analog card for one phone. Any recommendations? Thanks in advance for your help. Wayne

I assumed they would come in to the main did number 3400. I thought assigning every line 809-832 the pri line numbers, would do the trick. I could be wrong. thanks, wayne

Yes, line has disconnect supervision. Bell (AT&T) supplied no filters with the DSL. I will get some and install them. They did not send a single filter. Thanks for help. Wayne

They have 7 lines off a T1 with a drop and insert adtran. Thanks.

Does anyone know what software level on a MICS OLI works? Tried it on 4.0 software and it did not work. Did I miss something or is 4.0 too old. Thanks.

Norstar Fiber to Copper Adapter NTAB2261

Look at this link. Still can buy cheaper through Graybar, but this will give you and http://www.twacomm.com/catalog/jmp_Walker+-+Clarity/dept_id_184.htmidea.

Walker makes a handset inline amp. Very good and loud. Runs on battery or power supply. I bought them through Graybar. You might look at headsets with confidencers on them.

This may sound crazy, but could have bad amphenol or punch down.

I have customer that wants to record conversations and save the recordings for an indeterminate amount of times. The customer has a Merlin Legend with 4.0 software. Any of you done anything like this. Four locations on different floors. Thanks, Wayne

Thanks for the info.

Not certain of the type of Voice Mail, flash, call pilot, star talk, or what, but basically you set up a guest mail box outside the extension range. In the directory listing you would give mailbox to her name. As far as I know, all calls routed to the extension will go to the mailbox for that...

I am still a bit fuzzy.. You can get DID trunks on a nonPri, but you must have a DID card in the switch. Only way to recognize incoming digits. CLID the simple lising on the number of the person calling. Cannot route based on CLID. If you have a single line going to a single person you can...

Yes you can forward, but serviceboy is right. It is a crap shoot to have system forward call. Programming a speed dial button and letting them forward through telco is much better option.

If you can stand for a few minute delay, you can set up a voice mail box and turn on outcall notification. This will allow you to tell the caller to leave name and number and someone will call back within 5-10 minutes. We have done the Dest/Route programming to route to a cell phone. In one...

Do not know what DINT is, but CLID works on copper lines as long as you have the correct line card. Works on all Norstars 4.1 and up.

If you change them manually, you will not disturb other settings. If done on startup, everything will have to be reprogrammed. Do not forget to check PARK prefix. It is normally 1. Other than that, unles you have changed access codes, should not be a big problem