Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: M1tel
  • Order by date
  1. M1tel

    Virtual MiCollab cloud hosted

    Mivoice business express 1 ext IP 1 Int IP
  2. M1tel

    Upgrading 4.1 SP2

    This is what the article is referring to. It cannot see the Mitel SW MCD Software Installer tool displays "Unabl e to retrieve specified file" error when executing step 1 of the tool. The MCD Software Installer tool looks for a file entitled _swrevs in the FTP Server's default local path...
  3. M1tel

    Wiping a database

    DBMS flag off will wipe the sx2000 dgital DB not IP. Reload the controller with SW is the only true way to clean.
  4. M1tel

    DOWN GRADING MXE III RELEASE 7 HARD DRIVE TO 4.0

    Licenses will fail and even if he could, would need a backup of rel 4 in SDS mode
  5. M1tel

    One way speech over SIP trunk.

    Physical or virtual?
  6. M1tel

    vMCD Username and Password

    Try before you buy is not available without a valid sw assurance and application record.
  7. M1tel

    Dual T1/E1 Framer

    Yes
  8. M1tel

    Call routing not working?

    Check your no answer recall timer of voicemail it needs to e greater than the cfwd no answer timer of the ext and the system options call reroute timer
  9. M1tel

    DLM Licence Violation as one system is off the network

    If you clear the hardware ID it will clear the alarm til you have time to remove.
  10. M1tel

    MCD 6.0 SP2 (Speaker Button)

    Haven't seen this on any site yet, did you update the firmware on the sets, load ipdevice 1-999
  11. M1tel

    UCA desktop softphone

    Try changing your login requirements to weak in the MAS and test again. I had an issue with this set to strong.
  12. M1tel

    Creating phantom ext in mitel 3300

    Create a pkm on a set then add a key and reroute it. Or do a device only and reroute that.
  13. M1tel

    Blocking a inbound Call

    Caller ID Filter please carify. I can't recall a caller ID filter in the nupoint.
  14. M1tel

    Java issue on remote controllers.

    You need this patch or an Upgrade To Download and FTP the Revised JavaScript: You can use your preferred FTP client, or if you are not familiar with FTP, you can use the instructions below to use the FTP client supplied in the Windows operating system. 1. Download the attached uwi_jretest.htm...
  15. M1tel

    Bons for a sx200icp

    Max is set by your lic file if it has 8 then 8 is your max. Look on ebay
  16. M1tel

    Superconsole 1000 caller ID question

    Description/Symptoms The SC1000 only displays the first ANI digits when the COS is set for "ANI display only" (For example, an incoming call from 613-599-8449 will display on the SC1000 as 6135998 only) Body/Solutions COS option "Display ANI / ISDN Calling Number" must be set to NO to display...
  17. M1tel

    DHCP Discovery Fails

    Cisco switches? If so the dhcp options are incorrect, had a few happen
  18. M1tel

    Another query about SIP.

    check cos on the delay ring timer
  19. M1tel

    mediatrix 4102 with Mitel mcd

    There is a how to guide on Mitel on this, I always program them as sip trunks seems to work better that way.
  20. M1tel

    Restore Failure on a 5.0 SP1 PR1 upgrade

    likely had embedded vm?

Part and Inventory Search

Back
Top