Search results for query: *

Ah I just got it. Disabling Media Bypass in trunk configuration (in SFB). All is working as expected now. Don't confuse DTMF with DTF. They have very different meanings....

Just an update.. If I put the speedcall number into the SIP peer profile assignment by incoming DID (Incoming DID range), I can dial the speedcall number and get out via the PSTN just fine. I'm assuming this means I don't need a device between SFB-MiVB. Don't confuse DTMF with DTF. They...

SFB--siptrunk---MiVB--trunk to carrier - This is correct. Trunk to carrier is also SIP. MIVB Rel 7.1 PR1. COR on trunk allows for outgoing calls (same COR as trunk to Carrier - is this correct?) I can get a packet capture between SFB-MIVB first thing in the morning. Don't confuse...

Hi all, Any insight here is most definitely appreciated. I've integrated SFB/Lync 2013 and Mitel via direct SIP which works great. I can dial between SFB/Lync clients (that are configured for enterprise voice) and Mitel extensions no problem at all. My problem is I cannot dial out via my...

Sarond you're a legend thank you - I am up and running. It appears as though I needed to configure a proxy in the network element assignment form (it's covered in the KB 10-4940-00129 'Configure MCD 4.1 for use with Engin SIP Trunking Service Provider'). The FQDN's have changed a few times...

Appreciate that - Thanks Sarond. Will comb through this doc and see how we go. Don't confuse DTMF with DTF. They have very different meanings....

I've triple checked the credentials in SIP peer profile and all appears to be correct. Although - I have not seen the kb sarond has posted (perhaps there is something I have missed). Sarond would you have a copy of that kb you could post? Don't confuse DTMF with DTF. They have very different...

I'm trying to configure SIP trunks with the Australian ISP 'Engin'. This is proving a little more difficult than expected.. I have SIP trunks to iiNet working just fine and I can dial out and receive calls no problem at all. Engin SIP trunks don't seem to be working for me. When I run the...

http://www.dallasdelta.com/voipguardmk2.htm Have quite a few of these setup. Work great as a generic SIP device. Configurable relay code to open doors - works well. Don't confuse DTMF with DTF. They have very different meanings....

Hey mate, I am actually using HP controllers (I've used 2x different HP controllers with the 8440 Spectralink handsets)and am using WPA-PSK security. With reg domain 1 I am assuming you're in North America? I note you say you're walking around in idle mode and testing the roam.. What do you...

Have spent a bit of time getting these 8440/8441's to play nice with Wi-Fi. WPA2-Ent required the use of certificates and this did not fix any roaming issues for us. Can I ask what regulatory domain you have your phones in, and what channels you're using on 5GHz? -89dB is definitely too low to...

Depends what the alarm is?? The alarms should clear if the issue is no longer present.. So if they're still there you need to action it Don't confuse DTMF with DTF. They have very different meanings....

Hey, You could FTP to the controller and delete other MOH files that aren't being used (the directory should be /db/emoh) Don't confuse DTMF with DTF. They have very different meanings....

Thanks guys (as always!) Don't confuse DTMF with DTF. They have very different meanings....

Hi all, Just a quick one.. Anyone know if there is a limit on the number of parties for internal conference calls on 3300's? Don't confuse DTMF with DTF. They have very different meanings....

Billz66 thank you.. It seems the culprit was Lync. Remote call control was configured using LBG. User was setting the forward in the evening. Logging in remotely thus disabling the forward. Thanks everyone! Don't confuse DTMF with DTF. They have very different meanings....

You see the forward is somehow being removed. I have set the forward during day service by using a FAC. The phone definitely forwards (always) and in the morning its gone.. Suppose its possible the system has scheduled reboot too.. I'll have to check that Don't confuse DTMF with DTF. They have...

Its possible.. (will check when I get in the office in the morning). But will this actually 'remove' the forward? Don't confuse DTMF with DTF. They have very different meanings....

Hey guys, Hopefully this is an easy one.. What could cause extensions to lose their call forward settings? I have some 5330's that appear to be losing their forward overnight (call forwarding always from the phone itself). No one is knowingly removing the forward... Don't confuse DTMF...

06/04 08:47:46 0000:01:50 T4120 0001 9484 9198 9944 X 9480 001 0741215827 9132 A001068 Found this to be the call in question. Call was being directed to a mailbox. The caller was pressing 0 for assistance and being...