Search results for query: *

Hi guys, I have a strange issue where I have a phone connected via MRG to the main site where the NS700 is installed. There is a SOnicwall at the remote site. When make call there is 1 way speech If I take the Sonicwall out and put a Draytek in, it all works fine. So the Soincwall is...

They could be sending different digits on the inbound, try adjusting the ddi table to 4 digts etc

I've installed 2 on to a NS700, the main issue I'm having is that these 2 users are in a hunt group, once soneone rings in and a desk phone answers, the apps continue ringing, so when they answer it no ones on the line. Frustrating

The SIP extension set to Local+Remote so those new secuirty measures shouldnt effect it, should it?

Version 8

Hi Guys, Has anyone had any issue trying to get the TGP600 to work via MRG. Registered them on LAN, all good. MRG knows its WAN Getting no registeration attempts. Panasonic have looked at config on both TGP and NS1000 and they say its set up correctly. I'm thinking its the Firewall but...

If dummy do via FWD/DND under extensions

class of service - Call forward to CO - enabled DIL to extension (dummy or physical) On extension dial *710 2 9 ' number' #

Class of service - Transfer to CO (enable/disabe)

Flexible numbering - other features - change co access from 9 to 7 (if not using tie lines) delete 7 from tie access Quick dial - add 911 to dial 7911 Ive tested in uk and ok try your end.

What model system is it?

Check switch isnt set to initialise

To dial taht you would need to change CO access from 9 to something else. Create a quick dial so 911 dials trunk access 911

I presume you have an active UM? Need a dsp and sd for it to work, if you have then: You need to set a dummy extension, forward this to 500. The mailbox will be whatever the extension is(remember to create mailbox for the dummy extension). You can set a feature key to light up with messages...

Bit of a nitemare on these systems would suggest a delay ring, you will need to DIL the incoming lines

The call records will be saved to the users mailbox which isnt ideal for listening back, anyways heres the parts: Auto 2 way record licence:KX-NSU002w UM 40 hour SD strorage card rrp £230 - KX-NS5134 UM 200 hour SD strorage card rrp £805 - KX-NS5135 UM 400 hour SD strorage card rrp £1415 -...

auto two way needs a licence, its a site licence and retails for £490

yes

Set the UM to FXD as biggles says Set intercept to vm 500 after about 30 seconds This will sort the issue

Some many potential reasons...............