Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by staabj

  1. staabj

    Digital test set, do they exist?

    I googled 'digital butt set' and found this...never tried it, so I don't know if it works or not...http://www.electronictoolbox.com/telephone_butt_test_set.html
  2. staabj

    Vanity Plates IV

    I just saw this Denver news thread and immediately though of this thread! http://www.thedenverchannel.com/news/19121377/detail.html
  3. staabj

    Opt 61c trying to transfer a call with isdn ste

    I haven't been able to get the XFER key on my STEs to work yet either, but to get the CONF function to work, in LD 27, when you are building your TSP, make sure FEATID = AO6 60 60. Since your TSPs are already built, you will have to OUT and rebuild as NEW, then you will have to reboot the STE...
  4. staabj

    Old phone systems...

    When I was a brand new pup in the military, my first install was a 1A1 in a aircraft fuels storage unit. We also had a 402 in a RAPCON. Our command post was a massive 1A2, and their "secure" intercom was a 1A system. Our CO was Stroger step-by-step. At the beginning of the Afgan war, the AF...
  5. staabj

    BRI

    UILC cards are 2-wire, and the NT1 converts the circuit to a 4-wire S/T going into the phone. All ISDN phones I have seen require 4 wires. If you were using SILC cards, they are 4-wire, and then the NT1 would not be required.
  6. staabj

    BRI

    Check out NTP 553-3011-311. Since you are using a UILC, you will also need an NT1 to convert from a U to an S/T interface. John
  7. staabj

    CSE1000E 911 question

    Ross, I am in Omaha too, and I am almost certain that Bellevue (Sarpy County) and Omaha (Douglas County) have seperate 911 call centers. John
  8. staabj

    I3904 Customer Requirement Template

    Well, ACE, I guess AOSupport is having a bad day, huh?
  9. staabj

    Nortel vs Cisco - VoIP...

    CISCO must be an acronym for: Can I Spell Cost Overruns?
  10. staabj

    Callers list key on 3904's

    Hi all, I have found 2 phones that the call list works on. I have about 100 that it doesn't work on. All are version 8.9. I outed one of the phones that the list doesn't work on and copied a good TN to it...still no joy. I rebuilt a TN to match the working one, and, again, no joy. I just...
  11. staabj

    Callers list key on 3904's

    Triton, All I get when I hit the 'Callers' softkey is: Call Log 0 New, 0 Total Use Quit to exit I have outed and rebuilt the TN as well. I will try your suggestion in the morning when I come in. Thanks
  12. staabj

    Callers list key on 3904's

    Nope, no go again. I will keep playing with it and let everyone know what I find...it's these small things that keep us on our toes! Thanks.
  13. staabj

    Callers list key on 3904's

    Ace, that's what I do when my 'puter acts up too. Anyway, it didn't work. This is frustrating, because I am sure it is something simple!
  14. staabj

    Callers list key on 3904's

    big, I made the change, but still no go.
  15. staabj

    Callers list key on 3904's

    Thanks Bigindian, I'ss give it a try and let you know.

Part and Inventory Search

Back
Top