Recent content by SL1User

Did some reverse engineering in the meanwhile and found what I was looking for! Here's what I found To delete a personal directory entry for a specific number, type -> deletePDRLCL 0,"XXXXX",1,1,1,1 in the vxshell. Where XXXXX is the extension number To find out how many PDRLCL are...

Hi, just follow this document http://downloads.avaya.com/css/P8/documents/100120057 The files must be names screensaver0.jpg, scrennsaver1.jpg and so on. Also take care that the resolution is exact the one of the display. Hope this helped

Hi there, does anybody know the syntax in the vxshell to delete personal directories for ip phones? Due to a migration I need to delete hundrets of them in one step! Thanks in advance!

So the simring feature works? And you want to call into your system and make calls, is that right? What about printouts of your system? Have you made the PSTN route to an MobX route?

BTW forgot to mention this works in overlay 117

Why don't you use the command PRT IPDN followed by the fist octet of the ip address? This will give you all of you ip phones DNs TNs IPs and more.

What about the DCH programming? Did you set the outgoing T306? I think you forgot to set this timer because the two following release messages come immediately after the disconnect (4 sec) I would recomment to set it to OUT_T306 = 20, INC_T306 = 0 Then you should hear the busy tone of your...

Because Rls 5.5 supports context sensitive keys for IP phones, that means you only get the keys/functions offered that are available in this call state. Hope this helps!

it 19V DC at 1A (but I think this is the max.)

What happens? Can you describe a little bit? Have you tried to monitor with wireshark?

I'll keep the fingers crossed for them especially for all the employees.

Hi there, I had a similar problem. We updated the deplist (CS, SigServ and VGMC) and the problem dissappeared. There are a couple of patches against speech path problems on 4.5

Hi Brandon, I am quit surprised that somebody decided to change to a global Siemens SIP solution. For your problem the DAPC feature could be helpful. It allows to add digits in front of an incomming CLID depending on the NPI and TON of the call. The feat. is programmed in LD 15 CDB and LD 16...

Hi Phil, I had a test installation and a similar problem like you. Apart from some strange behavior of the MCS in combination with the CS1K, the users denied to use this application. I presume the potential users are still playing with there game consoles (ICQ, Skype Generation) at home. We...

Hi John, Nortel self offers TM3.2 to configure the System via PC. And there is a company in Switzerland that sells applications that do the same and even a little more (auto DSC programming within a CDP network). The product is called ATIRAS, SIGMA or SIGMA+ another product is Thomas and it...