Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by DrVuDu

  1. DrVuDu

    Hotel Toll Restrictions

    to my above post I was thinking of an RJ-45 Jack pins 1-8... I should say centre pins on all RJ's Regards, Dr VuDu
  2. DrVuDu

    Hotel Toll Restrictions

    Analogues: on an 8LCA about 9/10th of a mile on an AUCA and 4LLC 7.5 miles Digital 8DLC 1000 Feet 2DLC 2800 Feet Digital with AC Adapter 4DLC 4000 Feet 2DLC 4000 Feet if you have distances that are close but not working, double up your pairs to the 4 and 5 pin (I.E. wh/O and wh/Bu on pin 4...
  3. DrVuDu

    NEC 2000 Call Forward Busy

    I would check programming. MOC mode 200>A1>????? 200>B1>????? it should/could be 200>A1>012 (CF Busy/NA set) 200>B1>013 (CF Busy/NA cancel) I would also check CMD 21 for single digit access code to make sure that wasn't interfering with the 200 code. 210>A> if it says empty your good if...
  4. DrVuDu

    Faster calling of cell-phones

    AMND and 3536 should speed up your side of the equation. it won't affect the carrier are the carriers the same for both locations? some top tier carriers will process calls faster do you use access codes that have to entered for your 2000 site? a little experiment kind of like your theory to...
  5. DrVuDu

    Faster calling of cell-phones

    OMG.... Thats almost as good as you call this special number enter his 37 digit code and you can make free long distance calls for life. your getting RBT from the carrier and 4-6 seconds later the phone is actually ringing. The only place you could reduce time is before the RBT. assuming you...
  6. DrVuDu

    VM MWI for virtual

    Not uber familiar with the Octel. more of an AVST kind of guy. but I would set up a notification to a pager or cell phone if I was having problems with a MWI but on the switch side try this AKYD KYI= 2 KD= 2 (DSS Key instead of a Multi line app) TN= X STN = 2240 RG = 7 Regards, Dr VuDu
  7. DrVuDu

    VM MWI for virtual

    whats the VMM platform? Regards, Dr VuDu
  8. DrVuDu

    Feature Code or Access Code

    How about follow phone feature F-31? works great for digital to digital moves. Regards, Dr VuDu
  9. DrVuDu

    Trouble with V/M?

    First I would delete the offending mailbox then give a call to voicemail and leave a message. Check for the offending recording. retrieve the voicemail and check for the offending recording again. if the problem goes away I would reinstate the mailbox and see if another default greeting was...
  10. DrVuDu

    Trouble with V/M?

    Sounds like someone recorded a Greeting in the name field I would get into the Voicemail system and reset the voicemail box. otherwise I would have the user log into the box and chack personal settings and rerecord the voicemail box NAME this should do it. Regards, Dr VuDu
  11. DrVuDu

    NEC PHILIPS IPC 100

    your looking for a feature called "Caller ID Class" http://www.neccare.com/cng/docs.nsf/Lib3?OpenView click on NEAX2000/NEAX1000 then IPS then the IPS Features and Specs Manual look for caller id class and it should point you on thre right direction. you may also want to pick up the...
  12. DrVuDu

    NEC 2400 IPX Privacy

    Data Line Security! ASFC SFI 11 set to 0 that will Gar'un'Tee that no one will listen in on his calls Regards, Dr VuDu
  13. DrVuDu

    2400 IPXU PRI to VERAZ IP Switch ( C.O.)

    do you have a disconnect code (hex) from the Veraz? on the disco? here's a link to a table for disconnect codes for ISDN. http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml Regards, Dr VuDu
  14. DrVuDu

    DND problem

    and if it's not a true console but a dterm acting as a console . try 5110>tenant number>extn or pilot number to forward to. Regards, Dr VuDu
  15. DrVuDu

    DID numbers

    Ahhhhh Ha! we have a winner! your DID's are mapped to a virtual line! so in essence what you need to do is map out the 5xxx series of numbers via 7600 and you should be able to find open DID's if there are any more. you may have to create 5xxx series numbers in command 11 and map them to the...

Part and Inventory Search

Back
Top