Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

connection E1 between X8 and Eco server 4000 V10

Status
Not open for further replies.

Karmozdi

Technical User
Feb 18, 2019
120
US
Hi everybody
I have a question about the E1 connection between Ecoserver 4000 V10 and X8.
the call from 4000 to X8 are Ok but It is not possible from X8 to 4000.
with EQMA & ETSI protocols.
Please guide me, what kind of Protocol should I put?
Thanks a lot
----------------------------
ADD-TDCSU:OPT=NEW,PEN=1-01-012-0,COTNO=5,COPNO=5,DPLN=0,ITR=0,COS=5,LCOSV=1,LCOSD=1,CCT=" ",DESTNO=0,PROTVAR="ETSI",SEGMENT=8,DEDSVC=NONE,TRTBL=GDTR,SIDANI=N,ATNTYP=TIE,CBMATTR=NONE,TCHARG=N,SUPPRESS=0,TRACOUNT=10,SATCOUNT=MANY,ALARMNO=0,FIDX=1,CARRIER=1,ZONE=EMPTY,COTX=5,FWDX=5,CHIMAP=N,UUSCCX=16,UUSCCY=8,FNIDX=1,NWMUXTIM=10,CLASSMRK=EC&G711&G729AOPT,TGRP=5,SRCHMODE=CIR,INS=Y,SECLEVEL=TRADITIO,HMUSIC=0,CALLTIM=60,WARNTIM=60,DEV=S2CONN,BCHAN=1&&5,BCNEG=N,BCGR=1,LWPAR=2,LWPP=0,LWLT=0,LWPS=0,LWR1=0,LWR2=0;
----------------------------
CHANGE-LWPAR:TYPE=DIUS2,BLNO=2,LNTYPE=COPPER,VERSION=S2,QUAL=ON,MASTER=Y,DCHAN1=16,DCHAN2=0,PATTERN=D5,QUAL1=10,QUAL2=10,SMD=N,PERMACT=Y,FCBAB=DF,CDG=N,FIXEDTEI=0,CNTRNR=255,TEIVERIF=N,CRC4REP=N,DEV=INDEP;
--------
 
 https://files.engineering.com/getfile.aspx?folder=fcd712cb-f423-47a4-a2e7-814bf2752cf0&file=Screenshot_(1037).png
In that trace there is an alert, connect, connect acknowledge. Something answered that call.

As you haven't posted the 4K trace and I've asked twice, I'm going to drop out of this.
 
sorry Mr.Moriendi
Was this 4k report correct?
 
For OSBiz, do as in the picture.

Routes_1_ssywxl.png
 
I did exactly as you requested but still no connection.
I have already launched in different E1 projects and all are normal.
But in 4K V10 device I have problem with incoming calls. Please help me to solve this problem.
Thank you very much for your cooperation

It's interesting for me, when I dial the X8 user from 4K, I activate the Callback option, the X8 gives an alarm to 4K and the call is established,
but in normal mode, it is not possible to call 4K.
 
As I see in the kds file the E1 cable is included in channel 10-1?
 
As you can see here

0011 | 15:54:47 | DIUN2 9 - 1 - 1 | CALL_INITIATED | SETUP (ISDN) | Outgoing | 34 7B 14 00 08 02 00 01 05 04 03 80 90 A3 18 03 A9 83 81 1C 19 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 0B 02 02 01 43 02 01 29 03 02 07 80 1C 22 9F AA 06 80 01 00 82 01 00 8B 01 02 A1 14 02 02 01 44 02 01 3B 30 0B 30 09 0A 01 05 0A 01 04 0A 01 03 1C 17 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 09 02 02 01 46 02 01 00 84 00 6C 06 09 83 31 30 30 30 70 02 80 34 7D 02 91 81 95 32 01 81
0012 | 15:54:47 | DIUN2 9 - 1 - 1 | Call Request | Info | Outgoing | DAD: 4
0013 | 15:54:47 | DIUN2 9 - 1 - 1 | CALL_INITIATED | SETUP ACK. (ISDN) | Incoming | 32 07 14 FF 08 02 80 01 0D 18 03 A9 83 81
0014 | 15:54:48 | 1000 SLMO2 1 - 1 Master | Overlap Sending | Digit | Incoming | DAD: 040
0015 | 15:54:48 | DIUN2 9 - 1 - 1 | OVERLAP_SENDING | INFORMATION (ISDN) | Outgoing | 34 7B 14 00 08 02 00 01 7B 70 02 80 30
0016 | 15:54:48 | DIUN2 9 - 1 - 1 | Call Request | Info | Outgoing | DAD: 0

you had dial on trunk 9-1.
 
here you are

REG-REFTA;
ADD-REFTA:TYPE=CIRCUIT,PEN=1-1-12-0,PRI=0,BLOCK=N,READYASY=N;
ADD-REFTA:TYPE=CIRCUIT,PEN=1-1-12-1,PRI=0,BLOCK=N,READYASY=N;
..............................................
DIS-SDSU:ALL,,PEN,PER3,1,1,12,0;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-AP370013-----SG 1 LTU 1 --------------------- READY
** .LTG 1.LTU 1.012 DIU-N2 Q2196-X READY
CCT LINE STNO SI BUS TYPE
000 1486 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
002 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
003 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
004 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
005 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
006 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
007 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
008 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
009 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
010 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
011 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
012 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
013 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
014 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
015 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
016 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
017 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
018 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
019 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
020 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
021 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
022 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
023 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
024 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
025 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
026 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
027 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
028 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
029 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
030 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1486 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT
DISPLAY COMPLETED;
 
DIS-REFTA;

This is important
the protocol to be changed necessarily
as in the picture

PRI_QSIG_0_j4k3d2.png
 
sorry

DIS-REFTA;
H500: AMO REFTA STARTED
+-------------------------------------------------------------------------+
| R E F E R E N C E C L O C K C I R C U I T S |
+--------------+---------+----------+---+------+------+------+-----+------+
| PEN | MODULE | DEVICE |PRI|ERROR |BLOCK |SUPP. |READY|SRCGRP|
| | | | | | | |BUT | |
| | | | | | | |ASYN.| |
+--------------+---------+----------+---+------+------+------+-----+------+
| 1- 1- 12- 0 | DIU-N2 | S2CONN | 0| 62225| N | | N | 1|
| 1- 1- 12- 1 | DIU-N2 | S2CONN | 0| 30400| N | | N | 1|
+--------------+---------+----------+---+------+------+------+-----+------+

 
at the first of it was PRI QSIG ECMA slave according that fracture.
because it not answered i change for test now.
I was change every protocol two system were ready I only con not dialing from x8 t0 4000 .the lcd Phone write busy.
I return it to PRI QSIG ECMA slave now.
 
 https://files.engineering.com/getfile.aspx?folder=35fbbcb7-4347-455b-acd4-ae8a87ea2140&file=Screenshot_(1079)_LI.jpg
I have been doing this work for 20 years. I have trunked with various models of the telephone center through the Siemens device.
If you have a suggestion for training, please advise, I will do it.
I don't know about refta
thanks a lot
 
 https://files.engineering.com/getfile.aspx?folder=36ff0dc1-7ddf-4bac-ad67-91c78d7184ea&file=Screenshot_(1085)_LI.jpg
I defined the access code 7801 for the first line of the trunk. I deactivated the LCR tick.but with the code 7801 number 4000, I can't dial.
I activated the LCR tick and defined the route, whether with access code or without access code, the outgoing call is not Ok.
 
 https://files.engineering.com/getfile.aspx?folder=36ff0dc1-7ddf-4bac-ad67-91c78d7184ea&file=Screenshot_(1085)_LI.jpg
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top