connection E1 between X8 and Eco server 4000 V10

[Karmozdi]

Hi everybody
I have a question about the E1 connection between Ecoserver 4000 V10 and X8.
the call from 4000 to X8 are Ok but It is not possible from X8 to 4000.
with EQMA & ETSI protocols.
Please guide me, what kind of Protocol should I put?
Thanks a lot
----------------------------
ADD-TDCSU:OPT=NEW,PEN=1-01-012-0,COTNO=5,COPNO=5,DPLN=0,ITR=0,COS=5,LCOSV=1,LCOSD=1,CCT=" ",DESTNO=0,PROTVAR="ETSI",SEGMENT=8,DEDSVC=NONE,TRTBL=GDTR,SIDANI=N,ATNTYP=TIE,CBMATTR=NONE,TCHARG=N,SUPPRESS=0,TRACOUNT=10,SATCOUNT=MANY,ALARMNO=0,FIDX=1,CARRIER=1,ZONE=EMPTY,COTX=5,FWDX=5,CHIMAP=N,UUSCCX=16,UUSCCY=8,FNIDX=1,NWMUXTIM=10,CLASSMRK=EC&G711&G729AOPT,TGRP=5,SRCHMODE=CIR,INS=Y,SECLEVEL=TRADITIO,HMUSIC=0,CALLTIM=60,WARNTIM=60,DEV=S2CONN,BCHAN=1&&5,BCNEG=N,BCGR=1,LWPAR=2,LWPP=0,LWLT=0,LWPS=0,LWR1=0,LWR2=0;
----------------------------
CHANGE-LWPAR:TYPE=DIUS2,BLNO=2,LNTYPE=COPPER,VERSION=S2,QUAL=ON,MASTER=Y,DCHAN1=16,DCHAN2=0,PATTERN=D5,QUAL1=10,QUAL2=10,SMD=N,PERMACT=Y,FCBAB=DF,CDG=N,FIXEDTEI=0,CNTRNR=255,TEIVERIF=N,CRC4REP=N,DEV=INDEP;
--------

 

[masviss]

You need to increase the number of b-channels to 30 in TDCSU
because there are 30 of these channels on OSBiz.
Or reduce the number of b-channels on the OSBiz to 5.

 

[Karmozdi]

I increased the number to 30 channels on both devices.
The light of two cards turns on, the connection from X8 to 4K is not established. The following alarm is engraved on the LCD.
Not accessible

ADD-TDCSU:NEW,1-01-012-0,5,5,0,0,5,1,1," ",0,ECMAV2,8,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,10,MANY,,0,1,1,EMPTY,5,5,N,,,,,,16,8,1,10,,EC&G711&G729AOPT
,"",5,CIR,Y,TRADITIO,0,60,60,S2CONN,1&&30,N,1,3,0,0,0,0,0;

 

[Karmozdi]

DIS-CODEW;
+---------------------------------------------+-------+-------+-------+-------+
| | | | | |
| UNIT | CON- | USED | FREE |BLOCKED|
| | TRACT | | | |
+---------------------------------------------+-------+-------+-------+-------+
| OS4K V10 FLEX (VALID FOR IP AND TDM) | 12000 | 2 | 11998 | |
| OS4K V10 TDM (VALID FOR TDM ONLY) | 0 | 0 | 0 | |
| OS4K V10 OSMO | 12000 | 0 | 12000 | |
| OS4K V10 UNIFY PHONE | 0 | 0 | 0 | |
+---------------------------------------------+-------+-------+-------+-------+
H16: CURRENT CODEWORD IS A GRACE PERIOD CODEWORD.
H18: 2 TDM CONSUMES FLEX LICENSES.

 

[masviss]

If you call from 4001 to 4000,
does 4000 ring?

 

[masviss]

When the LEDs of two cards blink
show
DIS-SDSU:ALL,,STNO,PER3,4000;

 

[Karmozdi]

Yes, it is ringing
DIS-SDSU:ALL,,STNO,PER3,4000;
H500: AMO SDSU STARTED

STATION NUMBER ACCORDING TO PORT EQUIPMENT NUMBER
-------------------------------------------------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
** .LTG 1.LTU 1.001 SLMO24 ? Q2168-X READY
STNO INPUT CCT LINE STNO SI BUS TYPE
4000 000 1454 OPTI ONLY READY/BUSY
MULTLINE 8. . . . . . . . . . . . . . .READY/BUSY
001 SUBUNIT . . . . . DIGITE MAIN READY/BUSY
(ALT_ROUT: N) (OPTIP500)
LINE: 1491 STNO: 4000 SI:VCE
001 . . . . . . . . DIGITE SUB A READY/BUSY/CP
CPH
002 . . . . . . . . DIGITE SUB A READY
003 . . . . . . . . DIGITE SUB C READY

 

[Karmozdi]

sorry
Do you mean the two LEDs of the DIUN2 card?

 

[masviss]

This means the LED on the DIUN2 OSBiz board and
the LED on the DIUN2 OS4K board both blink when
there is a call.
Do you have licenses for subscribers and network
for OSBiz?
QSIG will not work without a network license for OSBiz.

 

[Karmozdi]

This report is when two DIUN2 cards flashed and I called from 4000 to 4001.
DIS-SDSU:ALL,,STNO,PER3,4000;
H500: AMO SDSU STARTED

STATION NUMBER ACCORDING TO PORT EQUIPMENT NUMBER
-------------------------------------------------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
** .LTG 1.LTU 1.001 SLMO24 ? Q2168-X READY
STNO INPUT CCT LINE STNO SI BUS TYPE
4000 000 1454 OPTI ONLY READY/BUSY
MULTLINE 8. . . . . . . . . . . . . . .READY/BUSY
001 SUBUNIT . . . . . DIGITE MAIN READY/BUSY
(ALT_ROUT: N) (OPTIP500)
LINE: 1491 STNO: 4000 SI:VCE
001 . . . . . . . . DIGITE SUB A READY/BUSY/CP
CPH
002 . . . . . . . . DIGITE SUB A READY
003 . . . . . . . . DIGITE SUB C READY

 

[masviss]

Read my previous post again.

 

[masviss]

001 . . . . . . . . DIGITE SUB A READY/BUSY/CP
this means the phone is ringing and you can
pick up the phone.

 

[Karmozdi]

This is TDCSU Trunk in Hipath 4000 V7 .and Ok now
ADD-TDCSU:OPT=NEW,PEN=1-02-012-0,COTNO=5,COPNO=5,DPLN=0,ITR=0,COS=5,LCOSV=1,LCOSD=1,CCT=" ",DESTNO=0,PROTVAR="ECMAV2",SEGMENT=8,DEDSVC=NONE,TRTBL=GDTR,SIDANI=N,ATNTYP=TIE,CBMATTR=NONE,TCHARG=N,SUPPRESS=0,TRACOUNT=10,SATCOUNT=MANY,ALARMNO=0,FIDX=1,CARRIER=1,ZONE=EMPTY,COTX=2,FWDX=5,CHIMAP=N,UUSCCX=16,UUSCCY=8,FNIDX=1,NWMUXTIM=10,CLASSMRK=EC&G711&G729AOPT,TGRP=5,SRCHMODE=CIR,INS=Y,SECLEVEL=TRADITIO,HMUSIC=0,CALLTIM=60,WARNTIM=60,DEV=S2CONN,BCHAN=1&&5,BCNEG=N,BCGR=1,LWPAR=2,LWPP=0,LWLT=0,LWPS=0,LWR1=0,LWR2=0;

but This is TDCSU Trunk in Openscape 4000 V10 .and not Ok
ADD-TDCSU:OPT=NEW,PEN=1-01-012-0,COTNO=5,COPNO=5,DPLN=0,ITR=0,COS=5,LCOSV=1,LCOSD=1,CCT=" ",DESTNO=0,PROTVAR="ECMAV2",SEGMENT=8,DEDSVC=NONE,TRTBL=GDTR,SIDANI=N,ATNTYP=TIE,CBMATTR=NONE,TCHARG=N,SUPPRESS=0,TRACOUNT=10,SATCOUNT=MANY,ALARMNO=0,FIDX=1,CARRIER=1,ZONE=EMPTY,COTX=5,FWDX=5,CHIMAP=N,UUSCCX=16,UUSCCY=8,FNIDX=1,NWMUXTIM=10,CLASSMRK=EC&G711&G729AOPT,TGRP=5,SRCHMODE=CIR,INS=Y,SECLEVEL=TRADITIO,HMUSIC=0,CALLTIM=60,WARNTIM=60,DEV=S2CONN,BCHAN=1&&30,BCNEG=N,BCGR=1,LWPAR=2,LWPP=0,LWLT=0,LWPS=0,LWR1=0,LWR2=0;

I see only one difference in these two paths and that is COTX
Hipath 4000 COTX = 2
Openscape 4000 V10 COTX = 5
Unfortunately, I can't change COTX 5 to 2 , it says F20: COTX 2 DOES NOT EXIST
Does COTX have an effect?

 

[masviss]

Show REG-COT:5;
COTX is assigned by default.
It does not need to be changed.
Do you have licenses for subscribers and network
for OSBiz?
QSIG will not work without a network license for OSBiz.
Without network licenses for OSBiz, you can
call from OS4K to OSBiz.
There is no going back.

 

[Karmozdi]

yes License Networking and S2M ant TDM are available in OSBIZ
but 4K License is GRACE PERIOD.

ADD-COT:5,PRI&RCL&XFER&KNOR&CEBC&CBBN&CBFN&IEVT&BSHT&BLOC&PROV&ATRS&TSCS&TRSC&CFOS&PINR&AOCC&CTLS&AMFC&NTON;
CHANGE-COT:5,COTADD,,S2COD,"20: S0/2 AMT EDSBRD O. ABWURF";

 

[Karmozdi]

<reg-feasu;
REG-FEASU;
H500: AMO FEASU STARTED
CHANGE-FEASU:A,CRITM&LDME&SPDC&SPDI&HTVCE&HTFAX;
CHANGE-FEASU:A,HTDTE&OVR&FRKN&NIGHT&COSXCD&COSXKEY;
CHANGE-FEASU:A,DCOSX&COSXATND&COSXT&COSXDP&ICPTDID&HOTRCL;
CHANGE-FEASU:A,DND&VARCONF&TRACE&SNR&RKNOVR&CBK;
CHANGE-FEASU:A,DSS&SPLIT&ONHKTRNS&PU&RSVCO&SER;
CHANGE-FEASU:A,DDTES&ISTR&RNG&NOCHRG&TRACCO&LEDSIGN;
CHANGE-FEASU:A,VMSDP&EMOVR&EMRLS&SYNCANN&CDRINH&CDRIC;
CHANGE-FEASU:A,CDROGNW&CDROGTR&DISCHINH&DISCHNW&DISCHTR&LCRET;
CHANGE-FEASU:A,POSTBUSY&POSTFREE&RELOCATE&VOICO&HTNW&PININT;
CHANGE-FEASU:A,TIMEDREM&ATTR&CPS&INCPRIO&XFBACALL&CALOGOPT;
CHANGE-FEASU:A,DIRCPCKP&DCPA&NCT&MOBHFA;
CHANGE-FEASU,WTATND&RELCON&RERING&AUTOV&DCBB&DCBNOA;
CHANGE-FEASU,PINNW&ECFW&XFBADIAL&CDRE&RCCB&MLPP;
CHANGE-FEASU,CDRACC&CLIP&SMARTCRD&SILMON;

 

[Karmozdi]

REG-ZAND;
H500: AMO ZAND STARTED
CHANGE-ZAND:TYPE=ALLDATA,TRANSFER=EXTEND,ALERTN=NO,AUTHUP=TA,RNGBKTN=YES,TRANSIN
H=NO,NIGHT=TA,ITRFWD=NO,HOLDTN=MUSIC,ANATESIG=TONE,DSSLT=20,CODTN=YES,CONFSUB=NO
,DATEDIS=DDMM,CNTRYCD="0",RCLLT=YES,MELODY="2",CPBLOWL=80,CPBUPPL=100,CUTHRU1A=Y
ES,PREDIA=YES,SIUANN="4",CO=YES,COEXN=0,CBKNO=99,SEVDIG=NO,PNNO=110,DISPMODE=MOD
E2,PNODECD=1,ROUTOPTP=NO,ROUTOPTD=NO,CALLOFF=YES,PARARING=YES,DSSDEST=NO,ONEPART
Y=YES,MSGDELAY=YES,EXCOCO=YES,TRDGTPR=NO,COANN=NO,HOTDIAL=NO,TRANSTOG=YES,NOCFW=
NO,HOLDHUNT=NO,POSTDDLY=YES,EXBUSYOV=YES,OVRMST=NO,OVRHUNT=NO,CONITPRO=NO,RECHUN
T=NO,CALLACMP=YES;
CHANGE-ZAND:TYPE=ALLDATA2,HOTELNUM=5,XFHGMAS=YES,DSSPICUP=YES,FASTCFNA=NO,DISPCH
ES=YES,DISCLHNT=NO,FWDWACKN=YES,BSYHANDF=NO,FWDMAX=10,FWDVMS1=NO,TRCCSN7=NO,FWDU
NDTR=NO,COSIND=NO,TRANSCO=NO,ANSES=NO,OLISFREE=ONHOOK,TEXTDISP=CENTER,PABXSELL=H
ICOM,DSPOWNNO=YES,DIRREC=NO,CSDTYPE="STANDARD",CONFTNCD=NO,LNR=YES,ROLCKVCM=NO,F
ACBUF=1,VCMTRANS=NO,HOWLTONE=YES,DISPNUUN="UNKNOWNNO ",DISPTGNA=YE
S,POSTDRED=NO,GRCALL=NO,MAILSCRL=NO,TEXTSEL=ENGLISH&AMERICAN&GERMAN&FRENCH&SPANI
SH,DISPREST=YES,UUS=NODIV,NOCFWTAC=NO,ISYNCHG=NO,ROUTTONE=NO,SOFTREST=SWITOVER,C
ALWTANA=YES,CBPBUSY=NO,SWSTAT=YES,VIRSUBNO=NO,OOSTONE=YES,TYPEDNIS=BOTHDNIS,CONF
TONE=NO,DISPTONE=NO,CAMPON=NO,USRINGTY="0";
CHANGE-ZAND:TYPE=ALLDATA3,NWTOPTIM=0,DDSIMPFL=YES,CIDBON=YES,RENSFWD=NO,VCOCUG=N
O,CFUI=NO,NOCFOOO=NO,CLIPSTD=ETSIFSK,CFNRDEST=ONLYCFNR,EXANTRF=NO,IPDAVCCF=NO;
CHANGE-ZAND:TYPE=RNGTYPE,DSS="DBLR2",FWD="SGLR2",EXTCO="DBLR1",NORM="SGLR1",RMDC
ALL="SGLR2",NVCE="SGLR1",MSGRCALL="SGLR2",PRI="PRR",MT="MTR",CBK="SGLR1",RECALL=
"SGLR1",COMGROUP="SGLR2";
CHANGE-ZAND:TYPE=CCM,STNRNG=YES,SRCHTN=RNGBK,DEL=NO,POSTDBSY=YES,SRCHONCE=NO,ANN
INTCC=NO,ANNEXTCC=NO,AAFTERB=NO,ADISPEND=NO,SYNCACCM=NO,NOENDPOU=NO,OPENNO=NO,IS
YNCCCM=NO;
CHANGE-ZAND:TYPE=CIT,FECCSDEV=0,APIMAX=0,APS=" ";
CHANGE-ZAND:TYPE=TN,SIUC="10",DTR="07",RDS="07",CONFC="7";
CHANGE-ZAND:TYPE=TONES,CP=OVRTN,SIU="0";
CHANGE-ZAND:TYPE=TONES,CP=CAMP,SIU="0";
CHANGE-ZAND:TYPE=TONES,CP=CONFTN,SIU="0";
CHANGE-ZAND:TYPE=TONES,CP=OVR,SIU="0";
CHANGE-ZAND:TYPE=TONES,CP=KNCONF,SIU="0";
CHANGE-ZAND:TYPE=CONFC,CODE=ALAW,CONFAT=0,STNAT=3;
CHANGE-ZAND:TYPE=DIUSL,EIDX=1,ACTION=NOACT,ERRTYPE=REMAL&REMAL64&LOFRA64&AIS64&N
OSIG64&REMCRC,MODPWSET=RES;
CHANGE-ZAND:TYPE=CCD,CDDISPEX=UNIT,CCUC=23,CDDISPAT="1",CDRRINGB=NO,NETPROV=NO;
CHANGE-ZAND:TYPE=ATND,CACFWMAX=2,EXTBSTNN=EXT1,ITRATND=YES,ATNDTN=YES,ATNDAL=NO,
ACCHECK=NO,ACOVLT=NO,OLDISPQ=NO,ATNDDISC=NO,ATNDHOLD=NO,WTATND=NO,PRICQ=NO,OVERF
LPM=NO,AUTNS=NO,ACEXTWFT=NO,ACCNTRY=0,ISYNCAC=NO,NOSPXTPM=NO,CALLRETR=NO,COD=NO,
INGHTACT=1,INIGHT=NO,RINEMER=NO,TAPALOW=NO,COMP1000=NO,CONT=YES;
CHANGE-ZAND:TYPE=OPTISET,DISPTIME="24HOUR",ACOUSTID=EUROPE,LANGID=ENGLISH&ENGLIS
H&ENGLISH&ENGLISH&ENGLISH,BUSYVOL=19,RINGVOL=4,RINGSOUN=2,ALERTVOL=2,CALLVOL=1,S
PKRVOL=4,ROOMCHAR=NORMAL,RSRSLMO=80,MAXVOL=7,SAVEVOL=YES,TAABCTID="2",DISPDEL=NO
,V2RINGSO=4,DISPCONT=2,ROLLVOL=3,CONSONLY=NO,MAMESCRL=NO,SRVCALL=NO,PICKOPT=NO,A
TONZERO=NO,PUSECOK=YES,CALLOG=NO;
CHANGE-ZAND:TYPE=SIUXPER,LEVDTMF="0",LEVMFC="0";
CHANGE-ZAND:TYPE=ACD,ACDALLOW=NO,MONTONE=NO,SUPAGTNU=NO,COCONN=NO,TIECONN=NO,ANN
CONN=YES;
CHANGE-ZAND:TYPE=VMI,MWIOPEN=NO,ALEN=8,BLEN=6,DTMFCTRL=NO,PICKUP=NO,NARELOUT=NO,
PIN=NO,VMIBLEN=NO;
CHANGE-ZAND:TYPE=DOMAIN,DOMTYPE=PRIVATE,DOMAINNR=1;
CHANGE-ZAND:TYPE=KEYSYS,COSLNBAS=NO,DISLNBAS=NO,HOLDACKY=YES,HDNOACKY=YES;
CHANGE-ZAND:TYPE=ACC,DCDRACC=F,ACCONEKY=NO;
CHANGE-ZAND:TYPE=LEDTYPE,RINGING="FAST",HELD="SLOW",CALLFWD="OFF",FEATURE="SLOW"
,PRIORITY="FAST";
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=1,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=1,DIVTYPE=CFB,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=1,DIVTYPE=CFNR,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=1,DIVTYPE=CD,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=2,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&C
D;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=2,DIVTYPE=CFB,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&C
D;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=2,DIVTYPE=CFNR,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&
CD;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=2,DIVTYPE=CD,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&CD
;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=3,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=3,DIVTYPE=CFB,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=3,DIVTYPE=CFNR,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=3,DIVTYPE=CD,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=4,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&C
D;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=4,DIVTYPE=CFB,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&C
D;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=4,DIVTYPE=CFNR,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&
CD;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=4,DIVTYPE=CD,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&CD
;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=5,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=5,DIVTYPE=CFB,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=5,DIVTYPE=CFNR,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=5,DIVTYPE=CD,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=6,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=6,DIVTYPE=CFB,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=6,DIVTYPE=CFNR,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=6,DIVTYPE=CD,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=7,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=7,DIVTYPE=CFB,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=7,DIVTYPE=CFNR,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=7,DIVTYPE=CD,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=8,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&C
D;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=8,DIVTYPE=CFB,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&C
D;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=8,DIVTYPE=CFNR,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&
CD;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=8,DIVTYPE=CD,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&CD
;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=9,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=9,DIVTYPE=CFB,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=9,DIVTYPE=CFNR,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=9,DIVTYPE=CD,MAXDIVNO=1,ALLDIVTY=NONE;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=10,DIVTYPE=CFU,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&
CD;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=10,DIVTYPE=CFB,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&
CD;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=10,DIVTYPE=CFNR,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR
&CD;
CHANGE-ZAND:TYPE=DIST,DIVSQIDX=10,DIVTYPE=CD,MAXDIVNO=10,ALLDIVTY=CFU&CFB&CFNR&C
D;
CHANGE-ZAND:TYPE=MLPP,MAUTO=NO,MCAMP=NO,MTONE=NO,MLPPDOM=0-0-0-0-0,MDIVAC=NO;

 

[masviss]

It is necessary to conduct trace of ISDN trunks or OSBiz - OS4K
or vice versa.
Without this, it is difficult to determine something.
How to do this is very difficult for me to explain.
No need to give extra information.

 

[Moriendi]

Although of course the B channels should be the same, you can see it isn't the problem in this case because there is a returned CALL PROC. You don't get a call proc with a B channel negotiation failure.
If both devices are starting from B channel 1 - you can worry about 6&&30 later. Also with an attempted call from OSBiz visible in the log, its unlikely to be a license issue.

From V10 the tracing is done automatically, if it's working as it should. Under Permanent Logging, you need the files from Mega Traces page, make sure the time period is correct for the test call.

 

[Karmozdi]

Incoming call log from 4K v10 to X8 on user 1000:
user NO 4k v10= 4000
user NO X8 =1000
-
Monitoring Port : 1000 SLMO2 1 - 1 Master
Nr | Time | Callnumber/Access | State | Event | Direction | Info
-----+----------+------------------------------+------------------------------+------------------------------+--------------------+------------------
0001 | 15:38:49 | 1000 SLMO2 1 - 1 Master | Idle | Monitor On | |
0002 | 15:39:00 | DIUN2 9 - 1 - 1 | Outgoing Call Proc | Monitor On | |
0003 | 15:39:00 | 1000 SLMO2 1 - 1 Master | Call Present | | | OAD: 4000
0004 | 15:39:00 | DIUN2 9 - 1 - 1 | INCOMING_CALL_PROCEEDING | ALERTING (ISDN) | Outgoing | 34 01 14 00 08 02 80 08 01 1C 17 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 09 02 02 01 3B 02 01 01 84 00 1E 02 85 88 95 32 01 81
0005 | 15:39:00 | DIUN2 9 - 1 - 1 | Outgoing Call Proc | Alert | Outgoing |
0006 | 15:39:12 | 1000 SLMO2 1 - 1 Master | Call Present | Off Hook | Incoming |
0007 | 15:39:12 | 1000 SLMO2 1 - 1 Master | Active | | |
0008 | 15:39:12 | DIUN2 9 - 1 - 1 | CALL_RECEIVED | CONNECT (ISDN) | Outgoing | 34 07 14 00 08 02 80 08 07 1C 15 9F AA 06 80 01 00 82 01 00 8B 01 00 A3 07 02 02 1B 30 02 01 03 1C 17 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 09 02 02 01 3C 02 01 03 84 00 4C 06 09 83 31 30 30 30 95 32 01 81
0009 | 15:39:12 | DIUN2 9 - 1 - 1 | Outgoing Call Proc | Connect | Outgoing |
0010 | 15:39:12 | DIUN2 9 - 1 - 1 | ACTIVE | FACILITY (ISDN) | Outgoing | 34 62 14 00 08 02 80 08 62 1C 22 9F AA 06 80 01 00 82 01 00 8B 01 02 A1 14 02 02 01 3D 02 01 3B 30 0B 30 09 0A 01 05 0A 01 04 0A 01 03
0011 | 15:39:12 | DIUN2 9 - 1 - 1 | Active | | |
0012 | 15:39:12 | DIUN2 9 - 1 - 1 | ACTIVE | CONNECT ACK. (ISDN) | Incoming | 32 07 14 FF 08 02 00 08 0F
0013 | 15:39:12 | DIUN2 9 - 1 - 1 | ACTIVE | FACILITY (ISDN) | Incoming | 32 07 14 FF 08 02 00 08 62 1C 23 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 15 02 02 1B F3 06 08 2B 0C 02 88 53 02 01 06 03 05 00 01 00 00 00 1C 1C 9F AA 06 80 01 00 82 01 00 8B 01 00 A2 0E 02 02 01 3D 30 08 02 01 3B 30 03 0A 01 05 1C 23 9F AA 06 80 01 00 82 01 01 8B 01 00 A1 15 02 02 1C 02 06 08 2B 0C 02 88 53 02 01 00 30 05 82 03 01 01 9A
0014 | 15:39:15 | 1000 SLMO2 1 - 1 Master | Active | On Hook | Incoming |
0015 | 15:39:15 | 1000 SLMO2 1 - 1 Master | Disconnect Indication | | |
0016 | 15:39:15 | 1000 SLMO2 1 - 1 Master | Idle | | |
0017 | 15:39:15 | DIUN2 9 - 1 - 1 | Active | Monitor Off | |

 

[Karmozdi]

Outgoing call log from X8 to 4K v10 on user 1000:
-
Monitoring Port : 1000 SLMO2 1 - 1 Master
Nr | Time | Callnumber/Access | State | Event | Direction | Info
-----+----------+------------------------------+------------------------------+------------------------------+--------------------+------------------
0001 | 15:54:37 | 1000 SLMO2 1 - 1 Master | Idle | Monitor On | |
0002 | 15:54:42 | 1000 SLMO2 1 - 1 Master | Idle | Digit | Incoming | DAD: 0
0003 | 15:54:42 | 1000 SLMO2 1 - 1 Master | Idle | Digit | Incoming | DAD: 0
0004 | 15:54:42 | 1000 SLMO2 1 - 1 Master | Call Initiated | | |
0005 | 15:54:42 | 1000 SLMO2 1 - 1 Master | Overlap Sending | | |
0006 | 15:54:42 | DIUN2 9 - 1 - 1 | Idle | Monitor On | |
0007 | 15:54:42 | DIUN2 9 - 1 - 1 | Idle | Setup | Outgoing |
0008 | 15:54:42 | DIUN2 9 - 1 - 1 | Call Request | | |
0009 | 15:54:42 | DIUN2 9 - 1 - 1 | Call Request | Setup Ackn | Incoming |
0010 | 15:54:47 | 1000 SLMO2 1 - 1 Master | Overlap Sending | Digit | Incoming | DAD: 04
0011 | 15:54:47 | DIUN2 9 - 1 - 1 | CALL_INITIATED | SETUP (ISDN) | Outgoing | 34 7B 14 00 08 02 00 01 05 04 03 80 90 A3 18 03 A9 83 81 1C 19 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 0B 02 02 01 43 02 01 29 03 02 07 80 1C 22 9F AA 06 80 01 00 82 01 00 8B 01 02 A1 14 02 02 01 44 02 01 3B 30 0B 30 09 0A 01 05 0A 01 04 0A 01 03 1C 17 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 09 02 02 01 46 02 01 00 84 00 6C 06 09 83 31 30 30 30 70 02 80 34 7D 02 91 81 95 32 01 81
0012 | 15:54:47 | DIUN2 9 - 1 - 1 | Call Request | Info | Outgoing | DAD: 4
0013 | 15:54:47 | DIUN2 9 - 1 - 1 | CALL_INITIATED | SETUP ACK. (ISDN) | Incoming | 32 07 14 FF 08 02 80 01 0D 18 03 A9 83 81
0014 | 15:54:48 | 1000 SLMO2 1 - 1 Master | Overlap Sending | Digit | Incoming | DAD: 040
0015 | 15:54:48 | DIUN2 9 - 1 - 1 | OVERLAP_SENDING | INFORMATION (ISDN) | Outgoing | 34 7B 14 00 08 02 00 01 7B 70 02 80 30
0016 | 15:54:48 | DIUN2 9 - 1 - 1 | Call Request | Info | Outgoing | DAD: 0
0017 | 15:54:48 | 1000 SLMO2 1 - 1 Master | Overlap Sending | Digit | Incoming | DAD: 0400
0018 | 15:54:48 | DIUN2 9 - 1 - 1 | OVERLAP_SENDING | INFORMATION (ISDN) | Outgoing | 34 7B 14 00 08 02 00 01 7B 70 02 80 30
0019 | 15:54:48 | DIUN2 9 - 1 - 1 | Call Request | Info | Outgoing | DAD: 0
0020 | 15:54:48 | 1000 SLMO2 1 - 1 Master | Overlap Sending | Digit | Incoming | DAD: 04000
0021 | 15:54:48 | DIUN2 9 - 1 - 1 | OVERLAP_SENDING | INFORMATION (ISDN) | Outgoing | 34 7B 14 00 08 02 00 01 7B 70 02 80 30
0022 | 15:54:48 | DIUN2 9 - 1 - 1 | Call Request | Info | Outgoing | DAD: 0
0023 | 15:54:49 | DIUN2 9 - 1 - 1 | OVERLAP_SENDING | CALL PROC. (ISDN) | Incoming | 32 07 14 FF 08 02 80 01 02 18 03 A9 83 81
0024 | 15:54:49 | DIUN2 9 - 1 - 1 | Call Request | Call Proc | Incoming |
0025 | 15:54:49 | 1000 SLMO2 1 - 1 Master | Outgoing Call Proc | | |
0026 | 15:54:49 | | Unknown State | SEGMENT (ISDN) | Incoming | 32 07 14 FF 08 02 80 01 60 00 02 81 03 08 02 80 B6 1C 23 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 15 02 02 1C 3E 06 08 2B 0C 02 88 53 02 01 06 03 05 00 01 00 00 00 1C 1C 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 0E 02 02 1C 4D 02 01 2A 03 05 00 00 00 00 00 1C 1D 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 0F 02 02 1C 5C 02 01 55 30 06 82 04 06 1C 08 40 1C 17 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 09 02 02 1C 6B 02 01 03 84 00 1C 27 9F AA 06 80 01 01 82 01 01 8B 01 00 A1 19 02 02 1C 7A 06 08 2B 0C 02 88 53 02 01 11 30 09 80 01 64 81 01 01 82 01 01 1C 55 9F AA 06 80 01 00 82 01 01 8B 01 00 A1 47 02 02 1C
0027 | 15:54:49 | | Unknown State | CONTINUATION | Incoming | 89 06 08 2B 0C 02 88 53 02 01 00 30 37 81 10 08 02 E0 B6 0C 06 19 80 34 30 30 30 74 02 00 C0 82 23 01 01 81 03 1B 02 00 00 00 00 00 00 E0 00 00 00 7F 7F 7F 7F 7F 7F 7F 7F 7F 81 04 80 05 00 80
0028 | 15:54:49 | | Unknown State | SEGMENT (ISDN) | Incoming | 32 07 14 FF 08 02 80 01 60 00 02 00 03 80 63 01 C3 1E 02 80 88
0029 | 15:54:49 | DIUN2 9 - 1 - 1 | OUTGOING_CALL_PROCEEDING | PROGRESS (ISDN) | Incoming | 32 07 14 FF 08 02 80 01 03 08 02 80 B6 1C 23 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 15 02 02 1C 3E 06 08 2B 0C 02 88 53 02 01 06 03 05 00 01 00 00 00 1C 1C 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 0E 02 02 1C 4D 02 01 2A 03 05 00 00 00 00 00 1C 1D 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 0F 02 02 1C 5C 02 01 55 30 06 82 04 06 1C 08 40 1C 17 9F AA 06 80 01 00 82 01 00 8B 01 00 A1 09 02 02 1C 6B 02 01 03 84 00 1C 27 9F AA 06 80 01 01 82 01 01 8B 01 00 A1 19 02 02 1C 7A 06 08 2B 0C 02 88 53 02 01 11 30 09 80 01 64 81 01 01 82 01 01 1C 55 9F AA 06 80 01 00 82 01 01 8B 01 00 A1 47 02 02 1C 89 06 08 2B
0030 | 15:54:49 | DIUN2 9 - 1 - 1 | OUTGOING_CALL_PROCEEDING | CONTINUATION | Incoming | 0C 02 88 53 02 01 00 30 37 81 10 08 02 E0 B6 0C 06 19 80 34 30 30 30 74 02 00 C0 82 23 01 01 81 03 1B 02 00 00 00 00 00 00 E0 00 00 00 7F 7F 7F 7F 7F 7F 7F 7F 7F 81 04 80 05 00 80 80 63 01 C3 1E 02 80 88
0031 | 15:54:49 | DIUN2 9 - 1 - 1 | Call Request | Progress | Incoming |
0032 | 15:54:49 | 1000 SLMO2 1 - 1 Master | Busy | | |
0033 | 15:54:52 | 1000 SLMO2 1 - 1 Master | Busy | Off Hook | Incoming |
0034 | 15:54:53 | 1000 SLMO2 1 - 1 Master | Busy | On Hook | Incoming |
0035 | 15:54:53 | 1000 SLMO2 1 - 1 Master | Disconnect Indication | | |
0036 | 15:54:53 | 1000 SLMO2 1 - 1 Master | Idle | | |
0037 | 15:54:53 | DIUN2 9 - 1 - 1 | Call Request | Monitor Off | |