Ok fellows. I Brought up a whole different system on my bench for testing all of the possible causes for sleepy sets.
I pulled ALL of the phones that I had that ever when to "sleep" on my installed system. I plug each one of these phones into the test sytem on the bench, using...
TelNetSystems,
Did you pull CAT-5 or CAT-3 at the site you installed this system? I am having the same problems with my system. I have replaced everything and yes, I even did the upgrade thing from eBay. I have CAT-5 pulled for my system and I am beginning to suspect...
Or connect the phone system to a computer via the Admin port using with the computer running the SPM software. The release and version number will be displayed in the bottom center of the dialog box.
Press <menu> on your MLX-20L that is connected to the programming port, (usually extension 10). Press the button next to "sys program", it should be the 5th button down on the right side of the display. Now press the button beside "Exit", this is the last button on the left...
Try an old Merlin analog phone handset, (from the BIS line). I have a "Digital Announcer" modelR-002 and that is what works on it. Good luck.
John
I need to know what the DIP switch setting definitions are for the Merlin Mail's Remote Maintenance Device, (modem). I know that I can use a different modem as long as I set the switches and the baud rate.
Thanks,
John
I just received an MLX-20L, used, that i bought off of eBay. Some of the buttons on it were not fuctioning at all. I simply took the phone apart, (only recommended if you have a delicate hand and some electronic REPAIR backgroud), and cleaned the Flexboard with alcohol, using a lent free...
This is for "bithead9". I posted the Avaya site for those who are a clutten for puninishment, (somebody wanted the full schematic). If you look down further, you will see where I posted a complete pin to pin layout. Follow it and all will be well.
John
Ok! I just got one of these "Home Made" RJ-45 to DB-25. I was not able to do the DB-9 without the DB-25 to DB-9 adapter. I'm sure that it was me. I used TimByrne's pinouts above and verified what I could with the Avaya link that I posted earlier. Follow his listing and use the...
Ok folks. I have searched the internet world over trying to find this very answer. I found it right on Avaya's own web site. http://support.avaya.com/edoc/docs/legend/legsmdr.pdf. I hope this helps everybody who has faced this situation.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.