Search results for query: *

sorry xcopy won't copy system files in use by the system if you really want to copy the files use bartpe or knoppix live cd and copy them

read up on ACPI i think you find what your looking for

so each user has a profile each profile is whatever the user sets did you some how delete the acl files for the profiles?

debug -F 200 L1000 0 -A CS:100 MOV AX,301 MOV BX,200 MOV CX,1 MOV DX,80 "81 IF SECOND DRIVE" INT 13 INT 20 PRESS ENTER -G

How can I add paging to this system

Ark Linux is a very good choice if your not using a laptop and want a working home user system fast It is simple to install and update. drawbacks: not very good PCMCIA support GNOME just not there evolution won't run advantages are all the audio/video stuff autologon easy update for packages...

boot with the xp cd and use the recovery console

Task manager /processes -rightclick and select priority

Memory bad XP is funny about memory replace 1 stick at a time

Why ? XP can use fat32

no need to set the server as the gateway if you have no where for it to be a gateway to. Name resolution is the key here netbuie will work but they must all be in the same work group if you want them all to have access to the shares unless you just want to you don't need ip addresses for this .

you did not say if they were imaged from the same image if so check the sid's .

I had a R 3.0 doing the same exact thing ,could not reset the time and date I pulled the back-up battery and powered it down and then I unplugged and removed the module and then reinstalled it without the batterys . after I powered it up I set the time and date without a problem and then...

How is this done any one have any ideas

To provide Ip access to your VM system R1 You will need PARTNER Messaging Release 1.0 software and a RS-232 cable to connect the PC directly to the PARTNER Messaging module if you want to change the default IP address of the PARTNER Messaging module. follow the steps below To connect the...

#728 system reset should work but if all else fails . Shut the system down and remove the backup battery . This performs a system reset and clears any memory remaining . You will have to reset the time and date but it will sync up when you are finished

you made a good decision

Assign the outside line to a Hunt Group: From extension # 10 or # 11 enter the “Programming” mode. Press # 206 and enter 6 when prompted for a “Group” number. This is the hunt group we are using for the RAS modem access. At the request for a “Line” number enter 8...