Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. stubbint

    Very Rare problem while login to AIX (RS6000) machine

    I'm assuming that as you can't login from the console you can't login from a telnet session either. It could be that you have simply run out of disk space. (\ is full) You'll need to get some media to boot from I'm affraid. Do you have a mksysb tape?
  2. stubbint

    How to change password with a single command?

    I can only suggest that you write an "expect" script
  3. stubbint

    HACMP version requirement for AIX 5.1

    I'm pretty sure 4.4.1 is the minimum
  4. stubbint

    Problems installing 36 GB SCSI HotSwap disks in F50

    36GB disk is not supported in an F50 I think you'll find the scsi bus is not wide enough to support them.
  5. stubbint

    problems with shell 32 to 64 bits

    msplaza My appologies, I should have read your question a little better. This link should answer all your questions: http://www-1.ibm.com/support/docview.wss?uid=aix12465b658044fc574852569e70056e923
  6. stubbint

    Can't find error code "0c45"

    I don't think there is such an error. If you have tried to reboot and can't it could be: c45 Cannot configure the console. Alternatively, your system has crashed and tried to dump memory, however the dump space on your disk is not large enough to store the complete dump. 0c4 Partial dump, not...
  7. stubbint

    problems with shell 32 to 64 bits

    The choice of whether you use a 64-bit or 32-bit kernel is made when you install the operating system. You cannot simply load a fileset. If you wish to change your system from a 32 to 64 bit kernel will will have to re-install the O/S I'm affraid.
  8. stubbint

    NIM problem

    Do you get the same problem if you bosboot from an aix cd or mksysb tape?
  9. stubbint

    CAN'T BOOT IN A 7248-132

    Check the SCSI Terminators.
  10. stubbint

    Problem with ICMP Datagrams!!!

    This is a guess! Is the system configured to use DNS? (/etc/resolve.conf) If so, check /etc/netsvc.conf look for the search order, it should read: hosts = local , bind not the other way round.
  11. stubbint

    7043-140 43P boot problem

    I don't think you are booting from the CDROM. Have you changed the boot sequence to boot from the CDROM? If you have and are sure that you are booting from the CD, try removing the graphics adapter.
  12. stubbint

    NIM problem

    What size disk(s) are installed in the client? It could be that the mksysb image you are trying to restore is too large for the disk(s) selected for the restore. More commonly, the mksysb image is from a system who's rootvg is mirrored on two disks. The system you are restoring to only has a...
  13. stubbint

    First day networking, bug, lesson learned, Firewall needed

    Try smoothwall for your Linux server. http://www.smoothwall.org Its easy to install and configure.
  14. stubbint

    telnetd logging

    Try this web page,I think it answers what you need to know: http://www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/ref-guide/s1-tcpwrappers-xinetd.html
  15. stubbint

    Restricted Pine Shell

    You need to create a script to run what the user needs and make the last line of the script /usr/bin/pine and substitute that for the shell as before. You may want to add a line to disable ctrl-c while the script runs.
  16. stubbint

    AIX 5.1 installation failure (missing filesets, during install?)

    You seem to have an old ISA card installed that is not supported under AIX 5.1 Remove the card and repeat the install
  17. stubbint

    6H1 Memory Card

    It depends on how many memory expansion cards you have. Each memory expansion card has 16 sockets. I'm guessing that as you have 6GB you only have the one card so 4 sockets left. IBM list price for 1GB mem (2x512) is UK£2,101 Memory Expansion card is UK£1,242 This is assuming that you don't...
  18. stubbint

    HACMP Configuration Q's

    You need to create the spool directories on a filesystem that fails over, and have them mount over those on the rootvg. You also need to keep /etc/qconfig in sync on all the cluster nodes. I suggest making /etc/qconfig a link to a qconfig file located on the above failing over filesystem. Create...
  19. stubbint

    Anyone tell me what this message is (and how to get rid?)

    I agree with e previous post. Its sendmail Simplest way to solve this is to make the /etc/hosts entry for your server look like this: <ipaddress> <hostname> <hostname>.<domain>.<com> ie 172.19.5.101 server1 server1.wibble.com
  20. stubbint

    Cofiguring Ethernet on AIX

    Can you post the output from the following commands: netstat -in netstat -rn ifconfig -a

Part and Inventory Search

Back
Top