I have a customer with 2 T7316's experiencing the same problem. The light on the phones are on as solid red. There are no messages (have also done #65). Have disabled the phones and when re-enabled the lights go off but come back on about 1 week later. Have repunched them on the 66 block and...
Sounds like a good idea but it won't work with this company since they work with the LEC on applications. I'll just keep an eye and the system and tell the customer what is going on. If they give me the okay I can pursue it further with the LEC but it's a touchy situation.
No, the problem is still there but the LEC said there is no problem on their end. I replaced the DTI card but it the error code is still there.
Let me know if you have any success in finding out what is causing the error code.
I have a customer with 7.1 expanded software and a PRI. Their system test log has been filled to 50 with the following error codes: 310-370175 and 310-3C00759E and one occurance of 310-36004DDD on 11/7 and again today, and one occurance on 11/7 of 310-3C0003E4. They have started experiencing...
Have a customer with a MICS with PRI, station modules and T series phones. The other day some of the phones just started resetting and wouldn't stop. The phones are not on the same module. Ended up moving them to open ports on other modules and they are now working fine but need to figure out...
Is there any way to have specific messages from a CallPilot mailbox converted to a WAV file or some other device other than a tape recorder. I have a customer who needs some messages that are in voicemail for a litigation case and doesn't think the messages onto a tape recorder will be allowed...
I have been installing, maintaining and programming the Norstar for over 10 years and have never had this problem which is the reason I'm stumped. All of the other systems I have out there when Park and Page is used the page follows the programming of the telephone system which means if a phone...
This customer does not page to telephones, only the overhead. Only two phones which are in rooms far from the overheads and not near other phones are programmed to receive pages, the system is programmed so that all other phones can page but are not part of a zone. When the customer hits the...
They are not paging only to the overhead speakers, so I'm not sure what setting the volume on the phones would do. All the page buttons on the phones are programmed to page to the external speakers (we programmed and tested). The volume of the page to the overhead is different depending on if...
Have just installed a MICS 6.1 with T7316E telephones and external paging. The customer parks calls and then uses the softkey to page and the page volume is fine. If the customer just hits the programmed page button the volume on the page is too low. This consistently happens when using the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.