You may have a corrupted copy of the 3.7 drive image. Suggest trying another. I had this same exact error on a 3.6 when trying the do platform init. New drive fixed it!
Yes,
you can telnet into the BCM 400 unit via IP address, Login with ee_admin, + password etc. From the main menu screen you can choose 7.(Command line)to view C:,D:,E:,F: etc and use the DIR dos commands etc.
Cheers
Try removing the coin cell battery on the Single board proccessor card and reseat it. If that does'nt work you may need to replace the drive. Are you getting display on the the NAM LED ie 7F or 5E,SA etc? Good Luck
Screet,
After entering F983 PSWD 266344
when you see SN the key choose next. It should give you the option to move on. The reason that you have to enter a password on F983 is that all memory on the Flash has been lost. Question please resond back.
Regards
MrStein77
It may be a bad hard drive on the StarTalk A. Try resetting the Startalk power and the Norstar KSU. If its still not working properly get a new hard drive. You should get a drive with the 2.04L Y2k compliant version. You can find them all over the internet, even Ebay.
Regards
The weakest link on the old Startalk is the SCSI hard drive. You can easily find one on Ebay or elsewhere on the net for around $110. I suggest that you make a config backup before your drive starts to fail though
Regard
I have experienced the same problem with "invalid handset" Try putting the handset in the cradle and removing the battery from the back of the handset then replace it. If that does nor work. Try removing try the AC power while the handset is in the cradle and repower up.
Regards
Mrstein77
You may have need to upgrade the KSU software version to match the Flash 2.0. What version on SW do you have on the KSU. It will need to be DR 5.1 or higher for 6X16 or 8x24.
Check that
Regards
Gary
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.