Norstar Flash 2

[JZJerry]

I have Flash 2 with 1.7 and i buy new sowftware card 2.0 system was working fine ,i instoll new sowftware and i have massage Inactive feature,i remove new card and put old but i havae same massage.Please help.

Regards Jerry

 

[DueE]

Did you try F903 after power up?


DueE

 

[JZJerry]

no i will do that

 

[JZJerry]

I have same massage INACTIVE FEATURE. Are there any additional steps which i should take or is this a matter of removing the old software card and installing the new one??

Please let me know. Your help will be greatly appreciated.

Regards,

Jerry

 

[mrstein77]

You may have need to upgrade the KSU software version to match the Flash 2.0. What version on SW do you have on the KSU. It will need to be DR 5.1 or higher for 6X16 or 8x24.
Check that
Regards
Gary

 

[JZJerry]

I have compcat ICS ver.4.2 and i try with flash 4 v.m and i have no probelm .That tell me the systm is ok.

 

[89549]

Try 9*1

 

[JZJerry]

i change the software card and is working fine
Thanks for help