To activate the Admin Menu:
1 From the handset menu, select “Calls”.
2 Select “Call time” from the Calls menu
3 While the Call time screen is displayed, press the following sequence from the
navigation and * keys:
> * < < * <
The Admin menu is displayed
On the MiCollab Client blade. Under Accounts, select the user and tick the box for reset dynamic status.
you may need to delete the old 5020 number and then do a line monitor refresh.
Use chrome as your browser. When you get to the error message, just click anywhere on the screen and type thisisunsafe. this will bypass the certificate warning and let you access the page.
your uc360 should have a label on the bottom for either in room collaboration or external collaboration. the in room device does not have a camera function.
even if you did have a external collaboration unit, you cannot use a usb camera. it must be an ethernet camera.
Use chrome as your browser. When you get to the error message, just click anywhere on the screen and type thisisunsafe. this will bypass the certificate warning and let you access the page.
You can put the Attendant Console in a different tenant with its own night service. You wont be able to set the system night service with the console though. you will need another phone on the main tenant to control the system day/night or use the business/system schedules.
Do you have an initial RAD playing to the caller before the UPIQ message plays? I think you need to have the caller hearing queue hold music before they can hear a UPIQ message.
are you doing the voice vlan via OUI? ie MAC Address instead of lldp?
Note some of the 69xx series phones have a different mac address vendor code. Older phones used the 08:00:0f: but some 69xx series phones use 00:08:5d:
Has the user enabled a call director call flow on their own mailbox?
From memory the users can setup a call flow by accessing the MiCollab End User Portal.
Yes, it goes into the second slot. the 128Ch Card goes into a non forward facing MMC slot. it is all written in the Technicians Handbook and the procedure to set the ip address to the second processor.
The Transfer button in MiCollab Client places the call on hold once the destination to be called is selected. If you just press transfer, you are still talking to the caller while you look up the destination.
the only way to have simultaneous handset and loudspeaker paging is to use the 5485 ip paging unit. the algo's are only designed to be rung as a sip extension.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.