Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel MXE III Expansion Kit installation

Status
Not open for further replies.

Dr_zZz

Systems Engineer
Oct 8, 2019
2
GB
Hi All,

I have been given an Expansion Kit for an MXE III, Consists of a 2nd Processor Card & a 128 Channel Echo Canceller.
First time seeing one of these, Am I right in thinking that the 2nd card is installed in slot 2 with the original Processor or is to replace.

Thanks
Mark
 
Yes, it goes into the second slot. the 128Ch Card goes into a non forward facing MMC slot. it is all written in the Technicians Handbook and the procedure to set the ip address to the second processor.
 
Hi Benny,

Thanks for the response, I installed & programmed.
Alls Good!
[2thumbsup]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top