Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. cpolley1

    Cannot run Cisco poE on shielded cable

    Don't confuse coincidence with the cause. Possibly you made the second connector correct and the original was not punched down correctly. I would be curious to know how you resolved this. Clint https://www.politoninc.com/service-area/denton.html
  2. cpolley1

    Premise wiring... Who's the Mac-daddy?

    Leviton is what we use. Easy, no special tools, and a decent price. We install several thousand cables per year. Clint https://www.politoninc.com/service-area/denton.html
  3. cpolley1

    Structured Cable (Premise Wiring) Testing...

    To start just get a 4 pair continuity tester for about $40 bucks. This will tell you 99% of what you need to know. If all your pairs are showing good you should assume you have POE or it's a switch issue. Or in case of unifi your AP will light up. No need to spend $20,000.00. Make some...
  4. cpolley1

    fiber inspection testing (viavi)

    Most likely your fiber cord that has a dark center is broken. Maybe these are hand polished connectors your looking at? Whenever the core is dark it's because he glass broke. Clint https://www.politoninc.com/service-area/denton.html
  5. cpolley1

    Orange Conduit vs Grey Conduit/Innerduct

    Most things gray in my experience are either for power or underground. Orange is definitely the color for indderduct in buildings. Most everyone knows what's inside. We quit running innder duct years ago and just used plenum armored fiber in buildings now. It's actually cheaper than inner...
  6. cpolley1

    UTP cable

    So the short answer is Cat 6 is rated at a higher throughput Mhz for a specific distance compared to Cat5e. I don't think you can even buy just plain Cat5 anymore or why would you. Everything is now cat6 pretty much. Clint Politon, Inc. Clint Polley...
  7. cpolley1

    slimeline recommendation

    Checking out/google viking phones. They make lots of analog type phones. They have slim line phons with and without a keypad I think. Clint Polley https://www.politoninc.com/demarc-extension-services/
  8. cpolley1

    help with cat5e wire jack

    Follow the B pattern. No one uses A series anymore. 99.999% of all Ethernet cabling is B series. Basically the green and orange reverse which is the diff from A and B. Clint Polley https://www.politoninc.com/demarc-extension-services/
  9. cpolley1

    Selling old system, anything I should do prior to dismantling?

    Ebay will quickly tell you the value. Some Nortel will sell and some is trash. Be careful not to fill your garage up with stuff that will not move. List it as a bid item and if no one bids then quickly get rid of it. Just my opinion of course but we do lots of this. Clint Polley...
  10. cpolley1

    Partner ACS R6 "partially" dead extension

    I think the power pair which would prob be either black/yellow or on a cat5 jack the green pair is shorted or fried in the port. If the phone works on all ports but x12 then I would either use a diff port or if I did not have any add an expansion module. I have never heard of the shorting...
  11. cpolley1

    One-X 9.1 no outlook pop up

    Have you downloaded the One X plugin for outlook? Check out this old thread... https://www.tek-tips.com/viewthread.cfm?qid=1767142 Clint Polley https://www.politoninc.com
  12. cpolley1

    Remote Cordless Phone

    Cisco 8821? It's a handheld wireless IP Phone. Reasonable price for a wireless IP Phone. Clint Polley https://www.politoninc.com
  13. cpolley1

    All Circuits are busy - Database

    Prob all your info has not propagated through out all the LECS networks. I imagine the side that is cut off is giving you the all circuits are busy through POTS lines but cell carriers have updated data and routes the call appropriately. I have seen this before other types of lines. I can't...
  14. cpolley1

    "Managers Exam" Opinions

    no opinions? Well I think I may have passed it anyways. I'll know in 30days. Clint Polley https://www.politoninc.com
  15. cpolley1

    IPO500V2 Expansion Interconnect Cable

    1 Ft Cat5e. You could make one out of shielded if you have it. I have used regular 1m cat5e parch cords and never had a problem. Clint Polley https://www.politoninc.com
  16. cpolley1

    "Managers Exam" Opinions

    We want to start installing security cameras in the state of Texas and you have to have a security lic. I am taking the exam next Monday but was curious if anyone has taken it and what is there thoughts. Any help is appreciated. Clint Polley https://www.politoninc.com
  17. cpolley1

    Algo 8301 paging gateway with Valcom 2006A and Ring Central Phones

    Thanks Curly Cord I was thinking it was a general discussion forum I'll double check next time. I was working with Algo tech support (who are really great and will log into your pc as well to check your settings) and they looked into the logs on the Algo and could not see touch tones from the...
  18. cpolley1

    Avaya Partner System Trying to Forward to New Phone System

    To me I never want to call forward out of a Partner System. It was always created future problems in regards to the lines not releasing. One of my few remedies was to request a service on that line from the LEC called "reliable disconnect". Not sure what it does but sometimes it would help at...
  19. cpolley1

    Algo 8301 paging gateway with Valcom 2006A and Ring Central Phones

    Does anyone know Ring Central Phones very well? They are a Hosted IP Solution that my customer has. They wanted to integrate there RC phones with there paging system via an Algo 8301 gateway. I have the Algo hooked up to a Valcom 2006A multi zone controller but the issue is we are not getting...
  20. cpolley1

    Comcast pots no speech

    I agree with Dexman. This is not a site specific issue but a Comcast issue. I bet they pushed an update out that has corrupted the boxes or something changed at the LEC. I would open a ticket on one and try to get there escalated tech support on the phone while on site and work through the...

Part and Inventory Search

Back
Top