Search results for query: *

thanks the TTI take care of this issue

i have s8300 server on a G450 after a black out, all unassigend station has no dial tone, assigned stations is working ok, i did reboot the server and G450 yet it did not help, the problem is on different cards in the system, there is an expansion G450 that is connected to the main unit and it...

can i use TAC to access pri channels, what is the configuration involve as iam getting busy when dial the TAC code from my extension

well then just on of the following busyout/release for the station, if this did not work i will say change the port of the station

check also on the station setting, make sure that mute button enable is set to no go to ch station xxxx page 1 mute enable/n

the only thing i could think off to check the phone type make sure there is a (+) on the type 6408D+

my phone has 2 cover p and i programmed a acov p access speed dial to scroll between the two program abbreviated personal list with the following ~s*22xxxx1 for cov p 1and ~s*22xxxx2 for cov p 2 where xxxx is my extension, it worked ok for a while yet some thing must change on my phone as iam...

i never change the security code before yet it worked for a week or so then now all calls go to cov p 2 and cannot scroll between the 2 cov p

i have a phone that have multiple coverage, cov 1 and cov 2, i programmed ~s*22xxxx1 and ~s*22xxxx2 on the to scroll between the two,(*22 is the access code for cov p)it worked for a while but now iam getting a wavier when pressing the spdial button above to change to the other cov what could...

2420 phones that does show the label /spd.. has an old firm software so your options is to get a newer version phones or you can update these phones yet it a quite a procedure to do this

with 7500 users and applications like vm to email, you have to have PBX level and cost will be high in any system you will install

no you do not as long as you have a centralized voice mail

I have 2420 phones that is connected on the same s8500 system, some of these phones when you press the log buttons, it did not show the other choices like missed,inans,outgo words in the buttom of the display, other phone is showing even though they are on the same digital card,any idea......

i have a door phone connected on an analouqe extension on avaya definty where people press the button, calls will ring on ext xxxx if no answer goes to group of people C1 in cov p, if no one answered how i can make the call to disconnect rather keeps ringing for ever

the music on hold is coming out in a very low volune when put some body on hold or use the backround music, i increase the volume of the CD to the max yet the level of MOH is still very low any suggestion

when power the G650, i have 3 cabinets, A,B and C any sequence for these also and does not matter Thanks

what is the right process , steps and sequence to power up s8500 server with 3 G650 cabinets after a power loss

make sure that you are using the right LWC depends on the ingrated mode it can be Audix or spe

i thing with PRI you can absorb all the digits and replace them with any digits, so the vendor is sending 0023 yet the definity is taking these digits and replace with others, i forgot with the commad that you can do this may be AAR, try to dig that way and see if there is such a set up

the only problem with this that the pbx is still not on the network yet