Search results for query: *

thanks I found exactly what I needed

I have a similar situation in a large networked environment and the way we got around it was turning off TRO on the tandem routes - it now uses 2 resources but the calls travel through the network with the proper CLID

Can anyone point me to where I find an administration document for the NRS setup - I have a customer who would like to be able to understand how it works and I searched the Nortel site but cannot locate the right document Thanks in advance

it ended up being in the RCAP we unchecked then submitted ND2 then re-checked it and submitted and presto it worked thanks for the response

We have multi-site SIP networked CS1000E and for one site the virtual D-Channel will not establish. We have compared the programing to the others and they are identical still no D-Channel - the trunks register and are idle Any suggestions would be great

We have a new CS1000E deployed and cannot seem to get an out of the box us robitics modem to work. it answers and you see activity but no characters back on the screen - we tried with and without a nul modem and various speeds still nothing - is there a setup for the modem on the new CS1K?

tried that any other ideas

Has anyone experienced a problem with Element Manager not giving the update software tab. We have a brand new BCM450 R1 that we open the tab and it has no available choices to see the patches in it or upload the new SU

that was extremely simple and I had it pointed incorrectly - I had it pointed to the PRI not the SIP route THANKS

you can get a compact flash adapter from a nortel supplier or staples then use a CF card in it. Depending on the release of the Option 11 the older ones used a 40MB card. The old part number from Nortel was 1N0312314

Has anyone setup VNR to go to a primary NRS for all number resolution? we currently have the sites route via SIP to the main PBX where in the old school way we have it handling the VNR. I would love to point any VNR to the primary or alt NRS and handle it that way Help if you can

Thanks I will go in and look at this

I have a customer who has a new Cs1K with SIP trunks back to an option 81C and they work fine - the option 81C has 4 other sites tied to it all using H.323 trunks we cannot seem to get the calls to pass from the SIP to the H.323 to reach the far end any suggestions would be great.

I have gotten from Nortel an executable 19.40B file to load for a customer who has corrupt data they advised to use the PCMCIA card programmer tool to format my PCMCIA card and let the tool automatically add the software from my specified directory. When I try this I get a permission error -...

from past answers and your web site I thought you knew it all - I will put it out to all as another post

GH if your still on have you ever setup a PCMCIA card to download software for an option 11? I have a customer who is at 19.40B has some corruption and I am running them off the backup Z drive - every tim I try the PCMCIA card programmer it tells me permission denied

no kidding - I tried to get them to upgrade to a 1000E and just add a node but with $$ tight they told me I was out of my mind

yes sir

Thank you all I went to site yesterday as saw the technician had only programmed cards 1 - 10 so I added loop 24 - 1 and had him continue on.

I have a customer with a Cs1000M adding a 3 T1 carrier remote to another building. The pacakge came with the local card as well as 3 cabinets (option 11 type) and all hardware. When configuring the loop as the document states I configured loop 24 per the slot of the card in the network. I...