Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ntcnctek

    TDS005 during midnights

    Does anyone know if there is a patch for TDS005 errors on release 5? Nortel stated that this was fixed in release 4.5 but we are now getting them on a realese 5.0 system
  2. ntcnctek

    SFA on Call Pilot

    This is exactly what i have done although i have another system with the same release working with 7 digits and not having to go throuh the SDN table. Nortel has came back with a patch for the PBX and CP. I will try tonight to see if this fixes the issue. Patch is 21796
  3. ntcnctek

    Give IVR xxxx with Treatment yyyy

    GIVE IVR command is telling script that you want to go to CP and give it Treatment which is followed by the App ID in CP. This is used to make the recordings for Symposium rather than using 3rd party devices.
  4. ntcnctek

    SFA on Call Pilot

    I have a site which is forwarding their number to site B. Call lands but when it goes to the Call Pilot it states that you have been forwarded to a voice mail system however the number you dialed does not subscribe to the system. I have a SFA on the receiving end set and have the DN associated...
  5. ntcnctek

    DCH messaging

    I have changed the settings and we are still experencing this every 15 seconds. I will open a ticket with the carrier. I have noticed that this is one of 4 T-1s and there is no traffic that hardly hits this
  6. ntcnctek

    DCH messaging

    Good thought, i did not program this but i always program the otbf to 127. I will change and let you know if this fixes the issue.
  7. ntcnctek

    DCH messaging

    Here is the DCH programming. I thought there is a way to turn off the MON feature in LD 96. >ld 22 PT2000 REQ prt TYPE adan dch 24 ADAN DCH 24 CTYP TMDI CARD 04 PORT 1 DES TAMPA USR PRI DCHL 4 OTBF 32 PARM RS232 DTE DRAT 64KC CLOK EXT IFC NI2 ISDN_MCNT 300...
  8. ntcnctek

    DCH messaging

    It shows 0 on all, Isn't there a way to disable the MON in LD 96. I thought it was something like "LOG MON OFF" or TTY MON OFF .lcnt 4 PRI LOOP 4 TRSH CNT: BPV -000 SLIPD -000 SLIPR -000 CRC -000 LOSFA -000 OS_BPV -000 OS_LOSFA-000 OS_YEL -000 . DCH: 24 MAINT INDICATION TIME...
  9. ntcnctek

    DCH messaging

    Does anyone know how to stop this message from occuring every 15 seconds? I have stated monitoring and it is showing off. DCH: 24 MAINT INDICATION TIME: 13:45:48 COUNTER VALUE 10 255
  10. ntcnctek

    MC32s card information

    I thought that the TLAN and ELAN (talks to PBX) was used for. See below: Embedded LAN (ELAN) IP address: 167.11.58.164 Embedded LAN (ELAN) MAC address: 00:1B:BA:F0:1B:C0 Telephony LAN (TLAN) IP address: 167.11.58.227 Voice LAN (TLAN) gateway IP address: 167.11.58.225 Hostname: 125w_mc_01...
  11. ntcnctek

    MC32s card information

    Does anyone know what the Telephony LAN (TLAN) DSP IP address is used for in the programming of the card in EM?
  12. ntcnctek

    QSIG

    Does anyone know where to setuop QSIG for T1 connection from a Nortel to Avaya PBX?
  13. ntcnctek

    Name display reading xxxx

    NAMD is what triggers the XXXX but I am getting it when they have NAMA as you see above. I will try and out the name and rebuild if that does not work I guess I will open a case with Nortel. I will let you guys know the outcome.
  14. ntcnctek

    Name display reading xxxx

    They do have CLBA but that is used for blocking outgoing CLID lines. I have 2 phones and they both have the same CLS with one getting xxxx and the other getting name display. ??? this is the cls on both phones CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA GRLD CRPD STSD MWA LMPN RMMD SMWD AAD...
  15. ntcnctek

    Name display reading xxxx

    Has anyone experience the nane display on some sets displaying xxxx instad of the name? We recently upgraded to release 5 and it only happens on a few sets even though they are programed the same as a set that works.
  16. ntcnctek

    AUD019 after upgrade from 61C to 1000M SG

    This turned out to be corruption in software when upgrading. Nortel had to go in and fix.
  17. ntcnctek

    ERR020 on loop 24 0 0

    I agree that it might be corruption. I had another loop 12 which was corrupted during upgrade but was cleared by Nortel. I currently have a ticket opened and am working on a problem with handsets going to speakerphone automatically. I have raised the question to Nortel that this may be linked...
  18. ntcnctek

    ERR020 on loop 24 0 0

    I was experiencing ERR5417 on 24 0 0 11 and 15. This was an analog card but there was nothng on unit 11. I moved all the units that were on 24 0 0 and moved them to loop 12. That cleared the ERR5417 but now I am getting ERR020 on 24 0 0. I tried to out the card but it tells me that it is...
  19. ntcnctek

    CS 1000M keycodes implementation

    I just installed some H323 and SIP trunks on P4 Go into LD 143: KNEW RMD You might want to split cores because it asks for a reboot.
  20. ntcnctek

    VGmc32s

    Have you gone into the node properties in the SS and put the elan mac address to register it?

Part and Inventory Search

Back
Top