Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS 1000M keycodes implementation

Status
Not open for further replies.

johnjose

Technical User
Nov 10, 2004
161
CZ
CS 1000M rel 4.5.
We need to expand SIP Access ports. After downloading keycode files from Nortel web site – what posibilities we have to implement it, can we use Element manager ?

Many thanks in advance

jj
 
Keycodes are added in load 143. The installation procedure is clearly outlined in document number NN43021-458. A procedure for each type of processor and/or media type is contained in this document. Remember to compare the license parameters. If an packages are added an restart is usually necessary.
 
If you have the PII or PIV processors this should take no time at all. You shouldn't even need a sysload.

John
 
I just installed some H323 and SIP trunks on P4
Go into LD 143: KNEW RMD

You might want to split cores because it asks for a reboot.
 
It will only ask for a reboot if you are adding a package or decreasing and ISM limit. Use the KDIF command to determine if there will be a reboot required.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top