Search results for query: *

I would honestly use 2x24s over a 48 unless the 48 is 2U. The 1u 48 port ones we used had the incoming ports in a little open spot in the middle so once any device was installed above it you could not trace or replace wires. I used 700409717 24 port and 70041253 48 port and both are fully...

Probably send it to another AA that plays that greeting and say to return to the main menu press 1. The only timeout embedded allows for is on the incoming call route and you probably want to use that for your main greeting time out.

I have a new IP500V2 with about 100 9650s and a PRI. Everything is working fine except the softconsole is showing some calls that are answered show up in the missed calls section of the call log. The calls come into a huntgroup with only one member and it is set to collective call waiting...

It is not a carrier problem. I have the issue with 2 systems on 6.0.14 and had the issue with 6.0.8 also.

yes works both ways, just turn up the first timer so it is longer than the VM answer timer otherwise the caller hears "im sorry but all of our operators are busy"

Turn on announcements for the user and increase the timer before the first announcement and it will play ringing for the caller.

Turn on announcements for the user and increase the timer before the first announcement and it will play ringing for the caller.

It is finally on the caviat page CQ44983 Users are getting indication of 65535 new messages 6.0.22 fix target - PL_RELEASE_6.1

I only had this issue when the customer tried to set passwords that weren't allowed. i.e. extension or 1111, 1234 etc.

I dont know how different a credit card machine is from Fax or Modem but just because a wireless solution sounds ok on a call does not mean it will work. I would suggest an IP based or iphone credit card reader.

HSM said - avaya has a tool... it isnt documented... try an avaya class. Read every line to see where it disconnects and look for a cause code. http://www.voip-info.org/wiki/view/SIP+response+codes

I had the same problem because the "load voicemail files" feature does not actually load all of the files you need. http://www.tek-tips.com/viewthread.cfm?qid=1602708&page=1

Dont "upgrade" to 6.0.14 or the issue will un-resolve itself

I could only see this selling to companies who are going to give their employees (i)pads anyways. There does have to be some kind of handset unless you want everyone talking on speaker all of the time. ie...

CQ44984|No ringback indication if a user fwds their calls off prem|5.0.20|SP_RELEASE_3Q10_5.0|3-Available|5.0.202603 move back to 5.0, or use the workaround at the bottom of this post http://www.tek-tips.com/viewthread.cfm?qid=1618097&page=1

you dont need the one-X unless you want to do telecommuter mode. If you want a soft phone then download the softphone. It is behind the logon but if you can get there it is called Avaya IP Office Video Softphone

only the oldest itouches missed mics. the newer ones have them.

I just put in 2 new systems each IP500V2 6.0.14 and it looks like this issue still exists (or has come back).

That was one of the caveats that was corrected. IMAP did not work if you dont have text to speech licenses.

and now support.avaya.com is down