Hi Guys!
Does anyone think a Dongle is needed to make the CIU and the smile 2.4.1 program to communicate as reguired? Althought the help menu says a Dongle is optional.
I cannot see incoming calls on the smile program and cannot make any call form it.
Incoming calls ring out only in the M2250...
I'm not sure what ur AC Voltage level is, if 110V, try 220V.
If persist, try with the working SSC.
The problem seems to be SSC hardware power level related.
Do you have another power unit for you 11C?
Many Thanks Guys, I moved TN and TN2 to a different position and the Red light disappeared, now green.
The previous TNs on card 5 are bad.
I am now battling with the SMILE 2.4.1 software to communicate with the M2250 console interface unit - CIU.
SMILE is not interacting with the CIU.
Mike
Thanks for your contribution, I can disable and enable TN & TN2 but not power TN whether the pc-console is powered up or down.
The front indicator on the M2250 pc console initially fluctuates between red and green when powered up and finally turn red instead of green.
This means the pc...
3902 and 3903 do not have same features.
If you need to keep a record of the configs of the 3902, print it.
then OUT it and build 3903 with the same TN.
LD 32 reveals that the TNs are Busy and the TN for PWR is Disabled.
The Self-Test on the M2250 Pc-based console was ok.
Does any one know the serial (DB 9) port settings for the interface?
Hi Guys,
I set up a new M2250 console with SMILE 2.0 software but its not working as expected.
TN1 - white/blue, (TN2 SETN)- white/orange and TN3 (PWR)- white/slate.
The front LED flashes between red and green for sometimes and finally turns red. The LEDs on the rear flashes red for a while...
Hi MagnaRGP,
Pls understand me. I dont want you to take some else's issues. I only want to meet you say, "off camera" if you dont mind. sidomultilinks@yahoo.com
Meanwhile the post from ld 143 is;
>LD 143
CCBR000
.MDP ISSP
VERSION 2121
RELEASE 4
ISSUE 50 W +
DepList 1: core Issue: 01...
MagnaRGP
Many thanks for this insight.
I'm not sure if I want to be falling back on my Vendor again. Slow rate of response is a reason.
Pls can I meet you?
sidomultilinks@yahoo.com is my email.
johnpoole,
Don't you think this issue is caused by hardware failure relative software?
I have a similar issue on an option 11C on 4.5,when I tried with another SSC from one of remote cabinets, it worked.
I'm not sure if PATCHing can do it.
Best regards
Hey Guys,
Any help on this?
I really want to know if there is any sort command to clear the error,
"IOD360 CPISR: Failed to service IO interrupt for Cabinet 0"
since and I can log into the system and issue any command.
All contributions are appreciated.
Regards
3tdp33ler
Thanks for the infomation.
But pls let me know this;
the creation of .csv file by OTM from CPND data, is it authomatic? or how is done?
Any NTP referal or specific commands outline will be very nice.
Regards
LD 95 takes care of assigning names to DNs, both new and modifications.
what I'm not sure of is if corporate Directory is built at LD 95.
3tdp33ler! what do think?
Thanks
I have done manual initialization (Man Int - NTDK20JA Rlse 01)b4 now.
For the benefit of doubts, I've done it again, this time the SSC at expansion cabinet 3. This is what was noticed;
============================================
SRPT017 OMM: IP link is UP between Call Server/Main Cabinet and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.