Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IOD360 CPISR: at 11C SSC

Status
Not open for further replies.

SIDO1

Technical User
Jun 1, 2007
23
A2
Hey Guys!

Need some help from all

Has any one experinced a problem with an SSC of option 11C such as this;
===========================================================
IOD360 CPISR: Failed to service IO interrupt for Cabinet 0 for 129 times
Interrupt is masked
===========================================================

The SSC is NTDK20JA and cannot notice any addition (IPEs)to the Switch & cannot perform ENLC/DISC.

Not sure of how to tackle this problem.

Any help is welcomed.

SIDO1
 
You have a faulty card according to the error message in that cabinet

OLD ROLMEN WORKING ON NORTELS
 
Yes I'm aware that there is a fault on the card.

There anything I can do so that the IO interrupt can be serviced?

Thanks
 
hi acewarlock!
thanks but i'm not sure of how do INI. pls shead more light.

Any other contribution is welcomed.

Hey! M4rKG & firebirdscrambler any solutions?
 
on the SSC card, push the button marked INI..... that'll do it
 
I have done manual initialization (Man Int - NTDK20JA Rlse 01)b4 now.
For the benefit of doubts, I've done it again, this time the SSC at expansion cabinet 3. This is what was noticed;

============================================
SRPT017 OMM: IP link is UP between Call Server/Main Cabinet and Media Gateway/Expansion Cabinet 3
-> The socket connected is: 61

SRPT016 OMM: IP link is DOWN between Call Server/Main Cabinet and Media Gateway/Expansion Cabinet 3


SRPT017 OMM: IP link is UP between Call Server/Main Cabinet and Media Gateway/Expansion Cabinet 3
-> The socket connected is: 59

SRPT016 OMM: IP link is DOWN between Call Server/Main Cabinet and Media Gateway/Expansion Cabinet 3
0x21cf6db8 (tOMM): ipvInit() set FPGA PCM size = 0
===================================================

I believe something can be done as that IO interrup can be serviced
 
Hey Guys,

Any help on this?

I really want to know if there is any sort command to clear the error,

"IOD360 CPISR: Failed to service IO interrupt for Cabinet 0"

since and I can log into the system and issue any command.

All contributions are appreciated.


Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top