Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: trrep
  • Order by date
  1. trrep

    CLOCKALARM CCAFAULT

    hi, you hav a 2 lim system. the MD110 is using 3 LIMS as master normaly. if you don't program al 3 lims as master ( scici) you will got always this "alarm bits" in the GJLSP printout. normaly this causes no alarm in the Alarm protokol (allop)!! in a 2 lim system you are not able to set the...
  2. trrep

    Tracing MD110 ports

    hi, you can trace also on unit=ELP6 (if you have analog lines)in the lim where the octel is connected. stuni:unit=elp6,lim= ; but you still have the problem to analyse the trace ! best regards
  3. trrep

    Can't end card

    hi, do you had have aDPNSS connection on the board befor ? do you want to have a comlete fix or just want to use the board position again ? if you need a complete solution we have to check a lot off pointers. if you just want to use the bpos again try...
  4. trrep

    Short Call Time...

    hi, does the phone ring in BC12 if you start the call from bc11? or is the line in BC11 only busy for 5-10 sec.? normaly a signaltrace will show the reason for the behavior. but maybe a restart of slp60,tlp60 and dtr in the bc12 lim can solve the problem too. at least as temporary solution. in...
  5. trrep

    Group Switch Clock Alarm (88)

    hi , i believe scexi and sfcei will not help, you have a problem with the Clock bus in the GSM byself. mostly that's a problem from the GCU2 board. normaly you should contact your service provider to fix this problem. another (selfmade and dangerous) solution can be: just pull out the GCU2...
  6. trrep

    QSIG to Voicegenie

    hi, there are mostly 2 possible problems. 1.) IVR doesn't use ISO call transfer 2.) you haven't configured EN number and SYIDI you can do this: search a free number in your numbering plan. let's say 777 nansi:nutyp=en,numse=777, syidi:exgid=777; if that doesn't help, you have to check...
  7. trrep

    MD110 Q-SIG to Q-SIG

    HI, there is only the aspac 223 for handling supplementary services. if you are working with the described programming you will set it to =0, this means you will use proprietary UUi between the both exchanges. to use network services maybe you have to set the ADC=0606100000000250006000000 for...
  8. trrep

    diversion on vpn

    Hi, i don't know if your problem is already solved. as fouesnant already wrot the User Info Message is not supported from your provider. this is a very common behavior , at least in europe. the provider mostly don't support UUI2 . UUI2 is a user-user-service after the alerting. if you change...

Part and Inventory Search

Back
Top