QSIG to Voicegenie

[GFDANNHAUSER]

Hello

I set a QSIG link from MD110 bc12sp10 to a voicegenie (IVR) system, Dialogic card.
Calls get transferred back to MD from the VG, but route optimization does not take place, here is the settings:
<ROCAP:ROU=200;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
200 0110000000000010 5 3110030000 0 30 30 00151515 111110000031 111111

END

<RODAP:ROU=200;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
200 SL60 H'00000310 H'15440000 H'06300000 NO

END


<RODDPEST=3200;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
3200 200 0606000000000250006000000 0 1 0

END
<ASPAPARNUM=66&70&71&72&73&223;

APPLICATION SYSTEM PARAMETERS

PARNUM PARVAL

66 1

70 60

71 10

72 60

73 5

223 7

END
Pleeze help!!

BR
George

 

[trrep]

hi,

there are mostly 2 possible problems.

1.) IVR doesn't use ISO call transfer
2.) you haven't configured EN number and SYIDI

you can do this:
search a free number in your numbering plan. let's say 777

nansi:nutyp=en,numse=777,
syidi:exgid=777;

if that doesn't help, you have to check how your IVR system is working. you can do this with an trace on SLP60.

best regards

 

[GFDANNHAUSER]

Hi Trepp

Done all those, used iso not ecma, syidp is set, IVR guy said he does not set it on his machine?

Did a trace and comes back with error " badly constructed APDU"

He sai he received a patch from Voicegenie, wants to test again, will keep you posted, its on a MD110 BC12sp10

BR