Search results for query: *

the file that the boot logo is in, is \windows\system32\ntoskrnl.exe you may have to get the file off the cd, or if you have sp1 you'll need to get that version since it was updated in sp1. when you get the original file, go into safe mode to restore the file.

can you see them from a command prompt? if so, they may have done an alt255 trick. this makes the first character blank and i belive it makes them invisible to older windows OS'es. while holding alt type 255 then the filename to delete it or whatever if this is the case. ex. del...

now i just need to figure out how to get another 1200 to send a default route to an ARN...

got it working... had to make an announce policy to announce static and bgp routes. it seems that bgp was the one i needed in there.

We have a Passport 8606 and a XLR1200. The 8606 is set up as the core and the 1200 is the remote. The 8606 has RIP turned on globaly and enabled with RIP supply, listen, default supply, and triggered updates on the VLAN. The 1200 has RIP enabled globaly and RIP supply, listen, default listen...

kwunder, according to the VCD specs, it is. If your DVD player supports SVCD (480x480 & 720x480, MPEG2) you might want to try that route. But, I have found that with my DVD player, if i burn a VCD in Nero but use a MPEG2 video file @ 720x480 it will play, kinda. I say kinda because the video...

you have to be consoled into the ARN to perform this 1.Power cycle the ARN. 2.When the ARN starts cycling through Power On Diags, type Ctrl C followed by a carriage return. This will put you in diagnostic mode and you will see the following prompt: Diag_1> 3.At this prompt, type in the...

here is what i would do make sure you have ALL your drivers for your components! boot to safe mode right after the new hardware is installed. In safe mode, go to device manager and remove EVERYTHING. reboot and it will find all your hardware including your new motherboard settings. you will...

do your two NICs have to have the same MAC address? in order to use MLT they must share the same MAC address.

Also, the c: drive HAS to be FAT or FAT32, because win98 can't read NTFS to put it's boot files there. If the c: drive is NTFS, it will have to be converted.

Cirrus9 is correct, as long as it is the same type the motherboard accepts (ie 168 pin DIMM) the speed of the RAM must be at least the speed of the bus of your motherboard.

first thing i would do is try to ping a domain name like www.yahoo.com or www.tomshardware.com to see if your gateway and DNS settings are correct. if that is succesfull, it may be the settings for IE. Goto tools > internet options > connections tab > LAN settings in IE and setup your proxy if...

update- i got it working i had to put a wildcard filter in there, set up the severity mask for warning, info, critical, and trace. i also had to put slot lower bound as 1 and upper bound as 1.

I haven't tried it with boot magic, but these are the instructions i used (I did have to convert the root c: partition from NTFS to FAT32 with partition magic): This configuration will work ONLY if the root partition is FAT16 or FAT32 and the partition on which you install Win98 is also FAT16...

does anyone know how to set up an ARN router to send events to a syslog server? I tried setting it up on one but with no success. The server DOES work because I have an Accelar 1200 sending events and it is recieving them fine. The settings i have put in using site manager are: Global...

it is frame relay

click windows update in the start menu. Then in the list of items on microsoft's site, there is a compatability update (mostly for games)

are you able to get into safe mode to remove it?

hey, what routing protocol are you using? check to make sure it is enabled on both VLAN's

does anyone know the best way to limit the bandwidth on an ARN. example - limit a T1 (1.5Mb) to 128K. some may wonder why, but there is a specific reason behind it. thanks all!