Search results for query: *

Jim9776, our Cisco Call Manager is version 4.3 and the phone is a Cisco IP Phone 7911, Please point me in the right direction, Thanks Your Help Is Greatly Appreciated. Thank You Undertaker48

Thanks Jim9776 you have been very helpful, I'll check for the verison of the Cisco Call Manager and what model Cisco IP Phones we are using and get back with you. Thanks Again. Your Help Is Greatly Appreciated. Thank You Undertaker48

We are going to VOIP Telephones, and I'm taking a VOIP course to understand the technology, but it hasn't walked me through, on how to set up a VOIP Phone, I found a web site that showed how to set up a VIOP phone step by step, but I can not locate it anymore, hopefully one of you can help me...

We are slowly changing to VOIP telephones, but at the present we have two types of telephones, VOIP and Nortel phones, the Nortel telephones have 4 digit extension numbers and IP phones have a 5 digit extension numbers, we have a TIE(PRI)between the two PBX's and I have DID's here for local...

Where in the Nortel Meridian 61C can I program the pbx to accept 4 and 5 extension numbers to ring nortel telephones and IP telephones, the nortel phones have 4 number extension and IP phones have 5 number extension numbers, which ld to make changes and what I should be changing to make this...

Hi All, Logged into Octel 250, at main menu, went to # 1 System Parameters, then went to # 1 Change Installion Information, and Changed Number of Digits in Extension, Changed Used for Outcalling and ECP from 4 to 5, also changed Used for Message Waiting, also changed the Sucscribers Extension to...

Hi all, I don't know if this possible, but here goes, Is it possible for the Octel to be programmed so it will transfer 4 and 5 digit extenisons, I went in and changed it to 5 digit, but it would not except a 4 digit exrenison number, so I had to change it back to 4 digit, the reason for this...

John, They set up the dch for loop 18 as dch 18 not dch 2, so when I found that out, I got everything back up running, Thank you for your help, it is greatly appreciated. Your Help Is Greatly Appreciated. Thank You Undertaker48

Hi all, John, I disabled dch 1 and can't disable TIE loop 18, I took the the steps you sent me, Thanks, but now my loops are down, making no calls, so do I need to take out the DCH, to get my system back, let me know what I should do. Thanks Your Help Is Greatly Appreciated. Thank You Undertaker48

John, I'm trying to disable loop 18, I disabled dch 1, but it will not let me disable loop18, I get Err PRI010 Disabling of this loop not allowed, associated dchI must be disabled frist, can you help Your Help Is Greatly Appreciated. Thank You Undertaker48

John, where do I check the qsig, this my first pri tie change, thanks Your Help Is Greatly Appreciated. Thank You Undertaker48

John where do I print all these loads, so I make sure I put everything back like it was except, for IFC. Thanks Your Help Is Greatly Appreciated. Thank You Undertaker48

I have a Nortel Meridian 1 61C, need to change the IFC from SL100 to NI2, Software version Seccions 4.5, can you give me the procedure on how to change this, What loads and what order to complete this procedure, I have 1 DCH with daughter board, the daughter board is my DID, any help would...

Ken Means, I went to 12 then 2 and I got this response: Integration Error Investigate System Environment 00000 82C00202 F9000000 28000B7E Eac10100 00010 51030000 21000001 51030000 00000004 00020 00E00300 990FFFFF CoD40100 00000000 00030 02212001 022504FF FFFF0000 00000000 00040 02216001 00414141...

John the Phone guy, Thank You for responding so quick, I have to take the TIE out and build the PRI the way I want it set up, where can I find the instructions to do this procedure. I've searched the FAQ and I've searched the Posts by Keywords, but with no luck, I'm suppose to go to Texas for...

John Poole, I searched FAQ for hours last night, trying to find out how to change a TIE to a PRI, did not have much luck, I was able to find some things about a PRI and a TIE, but nothing that I was looking for, if you know where to find FAQ to help me change a TIE to a PRI, I would be greatly...

How is the following Executed Triton101, Channel service uint/data service unit. Allows you to split the T1 for Voice and Data, (need one at both ends). You can't share it, but you can dedicate several channels for Voice and several for data.... Thank You If this is a long process, how do I do...

Hi all, Is it possible to use a T1 (tie), to do the following and if yes, how would I go by doing it. I have T1 (TIE) and it connects two PBX's and have access code to make a call, example: Dial 55 then dial 4554 and you can talk to someone from the other PBX, What I need to know is, is it...

I changed it the cls on the Hotline phone and they say they are happy with it, so I'm going say we are done, and I want to thank everyone for there help, and I tried to give everyone a star that helped, so if I missed anyone let me know. John Poole. I wish I had all the short cuts you know, then...

Keanmeans, I did have another company call into the Octel 250, to make sure that I needed a new hard drive, and they stated that the drive was dead, so I had them bring a new hard drive and install it, but was unable to save the information from the old drive to the new drive, and it is set up...