Search results for query: *

Hi again, I have a querrie on call diversion on a norstar to a mobile. The line supplier will not allow call diversion because of the call routing rules. I wish to know if the calls can be programmed to divert to the owners mobile using the norstar programming & if so, what norstar system does...

To Executone, Many thanks for your help in this matter. Niborsnriac.

To Curlycord, Thanks for explaining that to me, I wasn't sure of the rules. regards Niborsnriac.

Hi There, I have been out contact with startalk for a while now & then I am asked to configure one for a small Company. I have set up the mailboxes & the AA, but I have a question? Can an extension have a normal mailbos & handle the "General Delivery Mailbox" as well. I can't seem to...

If it is an earlier version Norstar:- 1)Press FEATURE 23646, enter the password agin. 2)Press NEXT to Administration comes up & press SHOW. 3)Press NEXT until Date& Time is displayed & press SHOW. 4)Press CHANGE & enter the required date & time. Regards, Nibor

Will try this out on my next visit, many thanks to all for your help, what a great site. Noborsnriac

Have you tried:- a) unplug the extn cords b) leave for 1-2 minutes c) power down the startalk d) remove the flash card (ESP protection needed) e) leave for 3-4 mins f) replace all cords & cards g) power up & try again This could be worth a try.

As our friends have said, it depends on the model of the Norstar. The newer models (Compact Plus) have 1 in built ATA, but older models will require 1 ATA per extn. The ATA's are well marked, one pair connects to the digital Krone connector & the other pair is the Analogue pair out of the ATA...

Have you tried setting the lines to "Loop Ungaurded" in the Line Data in Configuration? Sometimes this setting is required if V/Mail is on! Niborsnriac

To:- MRoberts, Thankyou for clarifying that. The problem is that there are 4 telephones in that group, plus the owner does not want everyone to have mailboxes, only one per section. The premises is an insurance company, so he wants a m/box for the motor dept (4 phones), a m/box for the...

Hi, I have installed a startalk as we call it here in N. Ireland onto a Norstar 8+24. When the callers press 1 for a dept, the call is forwarded to extn 227. On "call forward no answer" (3 rings) or "forward on busy" the extn is transferred to extn 226. Again, if this extn is...

Hi, Usually, to switch off your VM as you call it, here we call it Startalk 180, you enter the operator password & follow the prompts. Enter Feature 982, Enter the OPERATOR password, 67372867, which is the same as operator on the keypad. Follow the prompts, business open: y/n, etc, etc. This...

If you do not want to go to the cost of an ATA, you could TEE line 8 from your connection box to a master line jack unit & plug the answering machine into this socket. By manually switching the answering machine off & on, it will pick up any calls on that line. This is a quick & easy way out of...

The 24Volt power supply can be fitted at the Box Connection or at the 2/3a line jack unit. If at the line jack unit, it is connected to pins 2&5. Enter the configuration programming then move tom the Miscellaneous section. Move to the CAP assignment, begin with the CAP assignment in the display...

Hello all, I am a new member based in Northern Ireland. I do not know what a 3X8 system looks like as we only have the 6X16 compact & the modulars, 8+24 & 0+24. I have wiring diagrams of the later if you would like a copy. I can Email it to you if you like. Regards, Robin.