Search results for query: *

Im replacing a d500 with a new shoretel. the original vendor holds login info and not cooperating.all i want is details on call flow to config my new system. can i pull config or database files? any ideas?

I have a bcm 400 4.0 with a dsm 32 on bus 7.On bus 3 there is a 4/16 which we are not using analog side of module. My problem is that I only get 16 ports on dsm32.Will bus 7 not support dsm32? My plan is to swap modules on buses 3 and 7 and replace 4/16 with dsm16 since on analogs are needed...

Sorry about the mis-communication. I need to install a call pilot mini to opt11.

I have a opt11 with 50 users that need to add a call pilot mini to. MAC work has been the extent of my experience on the Meridians. Never installed a call pilot from scratch. Ive been stuck in BCM land so its been a while since I worked in the LD's. Im confident I can do it, I just need some...

found answer in ntp's.

Can I activate or enable dial in modem via telset admin. Customer in another state and bcm50 not on network. I need to walk customer thru telset so I can access via modem.

Thanks .......try it tomorrow

I ran the 4.0 check tool . CDR storage exceeds 200mb. ???????? How do i clear this. Wont run upgrade untill fixed.

Mics 7.0 with 6 base stations. I can connect and establish a call, but will not hand off to other base station. not sure what im missing.

HOW DO IGS & MGS RELATE TO THE INI?

DOES MY LAST POST GIVE ANY CLUES TO WHY? NOT SURE WHERE TO START

i got some wierd stuff happening. can any one help... TIM208 09:35 13/10/2005 CPU 1 INI000 0000002F 09 36 29 00000000 00000000 00000000 00000000 1 0 00000082 DSET000 DOWN LOAD 0 0 0 0 0 0 0 58679 INI010 00000058 00000059 0000005A 0000005B ACDR ACTIVATED ERR5417 0000B0E5 00000807 ESDA002 4...

GOOD CALL, I GOT A FLASHING LED ON RING GEN IN COL 4.THANK 4 THE HELP GUYS...

THANKS GUYS , I ASSUMED IT WAS LOOP 4 BUT WHAT DOES 04 1 2 MEAN?

% % PWR001 PWSP 04 1 2 % % PWR000 PWSP 04 1 2 % % PWR001 PWSP 04 1 2 % % PWR000 PWSP 04 1 2 IS THERE OR IS THERE NOT A PROBLEM. IF SO WHERE IS 04 1 2 LOCATED?

THATS CORRECT....MY VENDOR FOR THE UPGRADE SAID THE BAD TNS WERE FROM CORRUPT DATA AND COULD BE FIXED BY NORTEL. IVE ALREADY TRIED DIFFERENT CARDS AND SAME RESULTS IN SAME SLOT. I TOO SUSPECTED BACKPLANE/CABLE. HAVE U EVER HEARD OF THE CORRUPT DATA THEORY?

HARD TO BELIEVE LOOSE CONNECTIONS BECAUSE BAD PORTS POPPING UP ACROSS THE BOARD.LOOSE CONN WOULD BE WHOLE CARD NOT JUST SCATTERED TNS,RIGHT?

SINCE BEFORE OUR UPGRADE TO SUC 3.0 MY 81C HAD MANY DEAD ANALOG TNS. RECLAIMED QUITE A FEW BACK AFTER THE UPGRADE. NOT SURE WHY.NOW IM DROPPING PORTS AT AN ALARMING RATE DUE TO STATIC OR PLAIN DEAD (NO BATT). ANYONE ELSE EVER HAVE THIS?

HAD A SIMILAR PROBLEM WITH OUR UPGRADE. MERMAIL WAS STILL RUNNING AND LAMPS WERE FROM UNANSWERED MSG B4 UPGRADE...

THANKS BRO........SOMETIMES I MAKE THINGS HARDER THAN THEY HAVE TO BE.......MORE OFTEN THAN NOT!!!