warm start?

[ERR5020]

i got some wierd stuff happening. can any one help...


TIM208 09:35 13/10/2005 CPU 1

INI000 0000002F 09 36 29 00000000 00000000 00000000 00000000 1 0 00000082
DSET000 DOWN LOAD 0 0 0 0 0 0 0 58679

INI010 00000058 00000059 0000005A 0000005B
ACDR ACTIVATED

ERR5417 0000B0E5 00000807

ESDA002 4 9:37:08 13/10/2005

CSA003 4 9:37:08 13/10/2005

SRPT731 OS 1: Warm Start
Release: x210300
Created: Friday October 3 16:35:57 EDT 2003
Last Cold Start: 16/12/04 21:29:47 (from '/flash/flashos')

ERR9032 31 15 9:37:14 13/10/2005

AUD028 00DEA33C 00000400 00000000 00000000 00000002 00002C74 00000006 00000000

AUD005 00DEA33C 00000000 00000000 00000000 00000000 00000000 0000000C 00002C74

AUD028 00DEACE7 00000400 00000000 00000000 00000001 000024C9 00000000 00000000

CSA003 16 9:37:36 13/10/2005

CSA105 16, 9:37:36 13/10/2005

AUD075 00E09755 00000900 00000003 00001E08 00000004 00000000 00000000 00001E08 0
0000007


AUD075 00E0B375 00000900 00000003 00001C84 00000002 00000000 00000000 00001C84 0
0000007


AUD075 00E12779 00000900 00000003 00001E0C 00000002 00000000 00000000 00001E0C 0
0000007


SRPT751 INI 1: starting INI on side 1 due to System Restart
Previous INI: side 1 at 16/12/04 22:06:59
INIs since switch-over (13/10/05 02:13:32): 0, 1


SRPT752 INI 1: INI completed in 32 seconds

ELAN019 ELAN Server enabled after M1 INIT

ELAN014 ELAN 16 host IP=137.135.128.250 is enabled

AUD032 0000E0E3 000007C0 0000001F

AUD018 00000010 0000FC3E 0000FE7E

AUD032 0000E205 00000504 00000004

AUD032 0000E227 00000300 0000000C

AUD018 00000024 0000EF6A 0000EF6E

AUD019 0000890A 0000072C 000000C9

AUD019 00008B0E 0000071C 00000074

TFS501 16 0 2

TFS501 36 0 1

AUD399 0000001C 0000001A 0000DB01 00E09674 00E09674

AUD399 0000001C 00000011 0000DC01 00E0B294 00E0B294

AUD399 0000001C 0000001B 0000E081 00E12698 00E12698

PRI382 30 78

PRI382 28 78

CSA104 16, 9:38:02 13/10/2005

CDN002 16 3999 9 38 4
CDN002 16 3900 9 38 4
AUD005 00DEACE7 00000000 00000000 00000000 00000000 00000000 0000000C 000024C9

AUD000


pri errors look bad. why is this happening?

 

[johnpoole]

your switch is doing an ini, not a good sign. all call processing stops, no new calls, calls on hold drop, calls in transfer drop.. active calls stay up, no one can get dial tone.. the pri errors are normal for an ini, they should clear

john poole
bellsouth business
columbia,sc

 

[ERR5020]

DOES MY LAST POST GIVE ANY CLUES TO WHY? NOT SURE WHERE TO START

 

[mluckie1]

The INI0010 references IGS or MGS cards.

 

[ERR5020]

HOW DO IGS & MGS RELATE TO THE INI?

 

[johnpoole]

your ini started right after the time stamp TIM208 09:35 13/10/2005 CPU 1

INI000 0000002F
so anything before that might be a clue. the err's after that are a result of the ini, errors before that might give you a clue.. if you've got ld 30 out of drol, or a lot of err's running either of those, asr etc can cause that. a marginal card will cause that. you were on side 1 when it flipped, should have switched to 0 before it did a warm start

john poole
bellsouth business
columbia,sc