UNINSTALLING TRK CARDS

[ERR5020]

WE SWITCHED TO PRI SOME TIME AGO, AND SINCE I FINALLY GET A CHANCE TO FOCUS ON JUST OUR PBX I WOULD LIKE TO PULL OUT ALL THE UNIVERSAL TRK CARDS WE NO LONGER USE. IVE ALREADY DELETED DID'S AND COT'S IN LD14.NOW IVE NOTICED AN ERROR AND WOULD LIKE TO STOP IT.


ERR020 44 0 15

ERR5512 44 ERR020 BLOCKING ON

ERR5513 44 ERR020 BLOCKING OFF


MY QUESTION IS WHAT IS THE PROPER WAY TO REMOVE THESE CARDS ?

 

[ArchTelecom]

Pull the card(s) out.

 

[ERR5020]

THANKS BRO........SOMETIMES I MAKE THINGS HARDER THAN THEY HAVE TO BE.......MORE OFTEN THAN NOT!!!

 

[acewarlock]

If the red light is on pull it out.

 

[acewarlock]

ERR020
ERR0020 l s c
"Input message received from unequipped PE pack l s c. No data exists
for any TN on this pack, which is disabled to prevent further input. If
all messages from same pack or from
same PE shelf. Suspect: PE pack l s c (if present) Peripheral buffer on
loop l shelf s Network loop s, Cables connecting network and peripheral
shelves, Other PE packs on loop l
shelf s connectors. If all messages from loop L (various shelves).
Suspect: 1. Network loop l or associated cables or connectors 2. Any
peripheral buffer pack on loop l. For SL-1
XN: Messages occur only when a specific System Clock Generator (SCG) is
providing clock and loops in all groups are affected. Suspect: 1.
QPC411 SCG providing clock when messages
occur 2.Any QPC412 Intergroup Switch (IGS). Messages occur only when a
specific SCG is providing clock and loops on both shelves of one group
are affected. Suspect: 1. QPC412 IGS
associated with affected group when messages occur 2. Cable connecting
the SCG and IGS packs via the Junctor. Messages are all from loops on
the same network shelf. Suspect: 1.
Peripheral signaling pack on affected shelf 2.QPC412 IGS on affected
shelf 3. Any network, conference or TDS pack on this shelf. Messages
occur only when a specific CPU is active
and only one group is affected. Suspect: CE Extender connecting CPU to
affected group, or interconnecting cables. If all messages are from the
same XMLC/XDLC, then the XMLC/XDLC
is to be unplugged and reinserted (Option 11 only)."

Severity: Minor



ERR5512 n
ERR020 messages for loop n has been automatically turned OFF. ERR020
will be automatically turned back ON in 20 seconds.

Severity: Minor





ERR5513 n
ERR020 messages for loop n has been automatically turned ON.

Severity: Minor

 

[johnpoole]

also make sure you out the route, and any rlb's in 86 that point to the route. any of those that can be causing those codes. removing unused software is as important as outing the trunks, always out all related and then the card will be red, without a disu

john poole
bellsouth business
columbia,sc