Hi Guys,
Anybody have a templet for Word or Excel that will allow
to print labels for the 2000 style phones.
I am still typing them out on a typewriter sheesh.
We buy the blanks but type in the info.
DN, some features and so on.
Just wondering, We use a HP Laser jet 4000 N
and a HP 5
thanks
Hi Gys,
I think i found the area CLID is where you tell the phone
what to diaplay for caller ID. I am guessing 0 is default for display XXX-XXX-XXXX the full number.
I tried 1, 2 and 3 with no different results. I guess if I am in the correct area. can some one tell me how to program the...
Hi Guys,
I am on a Meridian option 61-81 system
I have security asking me, They want to add another line
to there current 2616 set. They want Caller ID Blocked on that line.
Not the phone, but just that line, is that possible?
Steve
Thank you guys for the great help. I was able to complete the job and a lot of the info did come back to me as i was doing it.
I have been on the NEC for a long time, funny how you seem to forget the little things.
Thanks again
Question,
I have an Meridian option 61-81 with 2616 display phones.
I have been on the NEC so long I forgot how to add intercom to a 2616 set. I have an end user that wants to add 4 intercoms to her set. If i remember can't I build a intercom group ? so she can press the intercom key, say...
Hi Guys,
I am trying to list or count ALL sets, Trunks, 500/2500 2616 and so on in several differents loops.
I tried this in load 81. is there a way to tell it to do this for one loop or a string of loops at a time.
I only want the info from certin loops not the whole switch. ?
Thanks Steve
I fixed it but thank you anyway
Someone built a analog line with the same DN and did not change the cls on it. analog takes control over digital for some reason.
anyway it works now
Hi Again Guys,
I have an option 61-81 system. I have a end user
stating she is not getting a voice mail light.
We have an octell voice mail. This is an ACD set By the Way. we also use genisus system.
I changed her phone just to test the lamp, I also
tried to turn it on via my phone with...
We dont have a 8859 in our system. Thats what i am trying to figure out. 8859?
We do own the 8000 range but I dont have that number programed in the switch.
So as of right now, I am guessing this call is from outside the company correct ?
Hey Johnpoole,
I did as you said and yes it came up with Route 15,
ACOD 4669
TYPE RDB
CUST 00
ROUT 15
DES ATT MEG/SDN 4669
John, does this help you ? I am still lost.
I am guessing the call came in on a ATT pri ?
ACOD Not sure Operator Console
(4669) 8-8859 1004
Hi Again Guys,
I have an Option 81 with 2616 phones. The operators use Meridian consols.
we have an operator that is getting disturbing calls from the outside.
she says the display shows
4669-8-8859-1004 corp 800 fax
does this make sence to anybody.
Thanks in Advance
Hi Guys
Question. I have an option 81. I have a user saying her call waiting does not work. My question is, does a 500/2500 set remove this option from a 2616 set.
she has a 2616 display set that was working fine. I created a 500/2500 companion set for her same number.
She is now telling...
Yup thats where it was John.
I dont know what I was thinking, I was lost.
Logged into MiRan, and changed it there..
Thank you for setting me straight.
Steve
Hi Guys,
I am working on an Opt 81..
They want to change an Recorded Announcement
Channel 3
Message Number #00028
Route 21
ACOD 4108
User Travel
current old message is 00026
can you tell me where to and how to change this ?
Thank you in Advance
Steve
Sounds like you have a
8 line 24 station Norstar System with DR5 software
M 0x16 should be a Fiber Module
M 12x0 could be a Pri/T1 Digital or trunk card
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.