You should download tcpview from sysinternals to help you with this. You'll be able to see which process on the system is creating all the close_wait's.
You'll want to go to the command line through telnet (or better ssh) and use the show commands to display info. Try "show ?" and it will list a set of parameters you can specify. "show port" will list out the status of ports, errors, and more that should help. "show version" will show the...
You probably could do with a couple different things here.
First, you need to put some hard numbers behind all this perception. Statistics from your switches, routers, firewall, and servers would be very helpful in figuring out if there truly is a problem or not. I'm going to assume that...
You should not have to restart any of your infrastructure equipment. It's meant to be running 24X7 unless you have to make some code update to it or something. What you need to get is a detailed explanation from your users. Troubleshooting "slow" is not realistic. What is slow? When do you...
iproute is on the right track here. Sadly, I always like to troubleshoot networking problems using the OSI. First things first, when you traceroute from work, where does it stop? If you can get to it from home, you may be able to identify the router at which the transmission is failing...
It's been my experience that Netbackup requires proper DNS resolution before being able to connect to clients. Make sure that works from your master server first before troubleshooting the Netbackup portion.
It's a single switch and all systems are connected via point to point. The nsshow table appears to be valid and all the devices appear to login properly to the fabric. Here's the switchshow below. Port 2=ADIC Scalar 100, Port 7=host2, port 8=Dell PV132T, and port 14=host1. The other devices...
The zoning is setup as you said. One library and host per zone. It only seems to happen when I add either the same library to two hosts or both libraries to a single host. The libraries are a ADIC Scalar 100 and a Dell PV132T, each with two drives. HBA's are QLogic 2200 or 2340. Switches...
I'm basically running a similar config with a 506 behind a DSL modem and have not had to set the PPPoE client up. Your configuration looks correct as far as I can see. Are you not receiving a DHCP address on your PIX but you are on another system? You may need to clone your MAC in order to...
Did you install anything from your cable company when you initally setup your connection? They may have originally had that in place and gotten rid of it. Either way, if it comes back after you delete it, you could search your registry for the ip:port combo, backup whatever key is holding it...
I have a group of Windows 2000 Servers connected to a Brocade Fabric with two tape libraries attached via Fibre. Using a Netbackup 5.0 SSO solution to share the libraries among multiple media servers. When I try and place one of the libraries into a zone that would allow it to be seen by two...
In Windows you can use the wpad.dat file to create customization within your proxy solution. By default, all IE browsers will run autodiscovery when they launch. You can create a DNS A record for a host to resolve to wpad.yourdomainnamehere.com for example and place your custom exceptions...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.