Search results for query: *

Put the Norstar back in. I bet the Norstar vendor installed it right the first time!

What I meant was there are already four 8x16 modules installed in the expansion cabinet that are working. Each has a different dip switch settings.

I have a BCM450 with an expansion cabinet. I tried to add a GATM8 card in slot 5 of the expansion. Went into element mgr and chose "catm8/gatm8" in the resources tab for slot 5. Then hit configure. When the next window pops up the dip switch settings field is blank. Its on 6.0 with the latest...

In the ARS table at the bottom is a drop down box. Drop it down down and choose alternate route or something like that. Then to the left adjust your timer down from 30 to 15 or 10 seconds.

cdavis, My company just installed a server edition with only 2 ip500 exspansions. We have so many problems I cant list them all. I want to throw the whole thing out the window!!! Hate to sound like an old Nortel blue guy but it getting rediculous. This product stinks. In regard to your dead air...

Wow! Why all the hate on this thread?

I need to take this test. Cannot find any course material to study from. does anyone know where to find it?

I cannot figure out how to use this thing. Can anyone provide me step by step procedures with screen shots? There is no "aquire button" on the excel sheet. frustrating!!!!

I have a UC520 running callmgr express. All of a sudden my redial buttons are inactive. All programming has been done using CCA 2.1, CCME.html and the CUE web interface. Sorry guys, no command line yet. Im still learning. Any ideas?

Curly, You where right! Swapping the NVRAM did not carry over the data. It blinked for like 20 minutes then came up in a defaulted database. So much for Nortel TAC support! Hopefully my company did not get charged for the call. Luckily I had a backup using NRU 11.0 . I then created a new...

Hello, I will be replacing an MICS 0x32 KSU soon. I worked with Nortel TAC and was given instructions on how to back up the data, which I am comfortable with. They advised me that the next step is to simply power down the KSU, pull ou the NVRAM cartridge and then install into new ksu to retain...

Problem solved. Public DN table inserted with the NPANXX. Adjusted 1 to 12 digits and default to 12.

dj4020...what are you asking. What does rpl stand for?

BCM50R3 and BCM400R4 connected via SIP to BCM400R4 w\PRI. Cannot call certain exchanges. Especially AT&T cell phones which this customer issues to it's road employee's. User gets fast busy. Any ideas?

I have a Pilot 2.0 with peps SU03 in it. If a mailbox does not have a greeting recorded the system plays the default greeting twice. If a greeting is recorded it works fine. Anyone else run across this problem?

Dtone, Look in either the class of service or system properties for a prompt that says "revert dn" yes or no. I think you have to set it to yes. It was yes by default for a long time until MICS NA 5.0 came out and it caused a problem with calls not forwarding to the mailbox greeting after the...

Hawks, Good idea.I will try it!

Problem solved. We convinced customer to order 8 Ground starts and a universal trunk card.

Thanks for the help everyone. I started out doing Norstar but know its pretty much M1. Let me know when 6.2 comes out!

Wow, You have been chosen to do a tidious task. Do you have a vendor? The reason you have to upgrade to IPE shelfs is because Nortel 3.0 Succession will not support the SL1 Hardware. Also you have to upgrade your software to 25.40B in order to get to Succession. Give me some more detail on the...