Search results for query: *

Check in Advanced Audio settings in Jabber. You can change the order of preference for the audio devices. I suspect Jabber is picking another microphone as the source.

In a duplex setup, normally it is a rather unusual 3 disk RAID1 setup. Usually CCA has 2 disks and CCB is 1 disk.

Internal or external calls? One way audio or no audio at each end? The RTP voice packets flow directly through between the endpoints. Check that IP traffic is routable between all subnets which have SIP clients / handsets.. Check firewalls for blocked RTP.

3000 series uses Manager E / Manager C software. You download the KDS file which is the database of the configuration.

Good Morning There might be some in HFA SIP OpenScape OpenStage iSDX Realitis HiPath DX Rolm 9600 Hicom OSB Software Downloads

As your Karel system is the calling party, have you check that it is sending the calling party name? Have you used the Real Time Monitoring on 4K to see if the name is received?

ODR 50 will be need to be set to whatever the overflow destination your want.

The problem with manipulating the number on the CUCM side would be that all calls into the Hipath would appear from 62588000, including internal calls between CUCM and 4K. Would either look to manipulate the number on the Hipath or ask the E1 provider if they can fix the outgoing number as...

IF the calls are working from 4K to X8. then the trunk and channels must be up. THerefore it is not a protocol issue. If the X8 definitely routing the calls correctly? My gut instinct would be routing issue, either the incorrect digits are being received or the calls are not going via the...

What do you get if you dial from a 4K extension into Teams?

Thanks again, SBCSU. [smile]

Thanks SBCSU, Yes, it's they are 4000 V10's. Thought there was somewhere it needed to be changed on the card itself.

Hello All, How do you change the IP address (plus subnet mask and default gateway) on an STMI-X (for SIP Trunking). The second LAN port is already set as an admin port so changing the LAN1 (eth0 ?) address won't break access. Could it be done via downloading the LAN1 config XML, amending...

MobaXTerm should work as well.

Could be Java issues, not unknown for CLA.

In English: F6524 SM-AM MAINTENANCE Type:Service-specific (several formats apply) Short text: Service advisory message, initiated by the alarm CENTRAL:029 MAINTENANCE NOTE. Cause: This message usually consists of plain text, which is either self-explanatory or refers to a specific section of...

From memory port 8085 is the HTTP port for administration in case you cannot use HTTPS

The old systems used MO (magneto optical) discs for backups, I believe. They hold more than a floppy but less than a CD.

looks like an RGMOD based on the picture in Google Image Search

Thanks Moriendi. Will speak to our partners about costs. Looking to add some for backups.