Search results for query: *

hi, you hav a 2 lim system. the MD110 is using 3 LIMS as master normaly. if you don't program al 3 lims as master ( scici) you will got always this "alarm bits" in the GJLSP printout. normaly this causes no alarm in the Alarm protokol (allop)!! in a 2 lim system you are not able to set the...

hi, you can trace also on unit=ELP6 (if you have analog lines)in the lim where the octel is connected. stuni:unit=elp6,lim= ; but you still have the problem to analyse the trace ! best regards

hi, do you had have aDPNSS connection on the board befor ? do you want to have a comlete fix or just want to use the board position again ? if you need a complete solution we have to check a lot off pointers. if you just want to use the bpos again try...

hi, does the phone ring in BC12 if you start the call from bc11? or is the line in BC11 only busy for 5-10 sec.? normaly a signaltrace will show the reason for the behavior. but maybe a restart of slp60,tlp60 and dtr in the bc12 lim can solve the problem too. at least as temporary solution. in...

hi , i believe scexi and sfcei will not help, you have a problem with the Clock bus in the GSM byself. mostly that's a problem from the GCU2 board. normaly you should contact your service provider to fix this problem. another (selfmade and dangerous) solution can be: just pull out the GCU2...

hi, there are mostly 2 possible problems. 1.) IVR doesn't use ISO call transfer 2.) you haven't configured EN number and SYIDI you can do this: search a free number in your numbering plan. let's say 777 nansi:nutyp=en,numse=777, syidi:exgid=777; if that doesn't help, you have to check...

HI, there is only the aspac 223 for handling supplementary services. if you are working with the described programming you will set it to =0, this means you will use proprietary UUi between the both exchanges. to use network services maybe you have to set the ADC=0606100000000250006000000 for...

Hi, i don't know if your problem is already solved. as fouesnant already wrot the User Info Message is not supported from your provider. this is a very common behavior , at least in europe. the provider mostly don't support UUI2 . UUI2 is a user-user-service after the alerting. if you change...