Search results for query: *

do u mean Meridian Integrated Call Assistant (MiCA)? Rami Yacov Taldor Communication LTD RamiY@Taldor.co.il

DTA301 say sleeping on the loop, its can couse from bad conector, to bad card or d-channel or clock not in sync (more often) first check ur clock and ur CRC4 on the loop check the LD 73 PRI2/LPTI LOOP XX parameters if its ok try to use without CRC4 use MFF check the clock card once i have...

have a Gatekeeper Trace Tools on the NRS console open it and see what happend leave it open so u'll see the resone of the disconnet Rami Yacov Taldor Communication LTD RamiY@Taldor.co.il

I intgrated Nortel 2 Cisco CM and on SIP its doesnt work good and on H.323 its use Q931 so u dont have Names, so QSIG is better for u now. i have some problem on it, like on H323, i using Alow and the CCM using Mulow and i have callpilot messaging, when i call from PSTN to Cisco to Nortel to...

and there is always be the Sysload switch to resolve the issue but in the HST make the buffer size to 65353 and u can run rdall on PDT to show more history Rami Yacov Taldor Communication LTD RamiY@Taldor.co.il

when u dial ACOD of Route u need to have CLS UNR and the FRL on the Route need to be allow on fcr table e.g. DN 100 with CLS UNR TGAR 7, NCOS 0 Route 1 with NO TGAR, with FRL 0 0 FCR table: 0 init alow with NO deny digits and with Members idle state now dial. Rami Yacov Taldor Communication...

its configure as H.323 Gateway or SIP Gateway? Rami Yacov Taldor Communication LTD RamiY@Taldor.co.il

OK by default when u setup Login Name on PWD1 is Admin1 and PWD2 Admin2 unless u change it if this option it on and u want to add another user (lapw) u will have to choose the login name to this account also like rami ot other name and associate with lapw PWD1 or PWD2 or OVLY or SBA and when...

like wrote ontop Config Manager admin/root RLC/9150 guest/guest123 Regards, Rami Yacov

Hi, about the MDP REFRESH have a patch that fix his problem but dont use MDP if u have special patches!!! Regards, Rami Yacov

OK first in ACD parameters u need to alow the ACNT u have two prompts NRAC set to YES and NDFL set to 000 and then go to SCCS ACNT table make sure about the code on set make sure u r logged in press NRD, the ACNT will flash press it push DTMF the ACNT code and then ACNT Regards, Rami Yacov

on SMI u can choose what to see (from Supervisor View) Report Agent Associate Agent what view u r look at? Regards, Rami Yacov

Hi, say, u add him to domain environment? this is a Co-Residant Server (SCCS/SWC) what version 4.5/6.0 can u enter with the SMI to SCCS DB? Regards, Rami Yacov

OK disable in the card in the pbx and refresh the status on the OTM and then u/l dont forget to download the latest FW for Phase 1 B76 for Phase 2 D9I Regards, Rami Yacov