Search results for query: *

I am running CM2 and I use sta dlg cti-link

I am currently running CM 2.0 with IP Office for conferencing. The expanded meet-me is much better however, the IP Office cost me about $3,500. (but I also had to buy 2 DS1 cards as well) I took the existing meet-me vdns and changed them to regular vectors and hard coded the pass codes. The...

Thanks for the info, I am going to take that approach... Joe

We are in the process of upgrading our MM from 2.0 to 3.1 (with an MSS). We currently have about 30 people or so, using the Outlook client. After the upgrade is complete, is a reinstall of the client necessary or is there a service pack that we can push out? Any guidance would be greatly...

I have the same problem. Haven't fully confirmed this one yet, but (I think) my problem is that the agent's stations are in the same tenants as their supervisors but the tenant of the agent id is not in the correct partition. Just thought Testing this one tonight...

I just had the same issue with a modem on an 8300 using a DID. Had all of the same issues that you described: answered internally, analog station was fine, etc. Eventually replaced the modem and still experienced the same issues. I was told by the BP that apparently there is a problem with...

I still have this going on... By any chance, were you running CCE via Citrix?

I have an IP LSP site that is having registration issues since a recent power outage at our main site. All toll, there are 39 IP phones at this location. 20 are registered to the CLAN at our main site and 19 are showing disconnected with a download pending. The CLAN for VoIP services is...

Same thing, fax tone. And I think you are on to something with the QSIG...

No, the call completes and sounds normal. Apparently, I have just found out that this happens to all MM users as well.

So it is associating the Nortel console with a fax?

When Object Event Type Call-Id Message Application Server Information Port Mailbox Directory Search Key 05/23/07 14:49:00 3996053387 21216 Information 22549 MASXXXX Caller has requested to leave a message for mailbox 54202 after a busy condition. 14 54202 05/23/07 14:49:00 TUI 21340...

I will give that a shot, thanks. I will post the results.

Any help or direction would be greatly appreciated… I have a location that presently has two phone systems: a Nortel Meridian and a Definity S8500. The Definity has one MAS 2.0 and one MSS 2.0. The Nortel is using Meridian Mail. These two systems are connected via Q-sig T1. The switchboard...

According to the link below, Nortel Custom is C. http://www.jaymzworld.com/pages/linux/pages/isdn_protocols.shtml

I believe the protocol for name and number is NI2. I have always had to specify NI1 or NI2 when ordering. Typically, I just use NI1 which is number only. If you have the order sheet from you telco provider, it should be detailed there. Joe

Page 2 on the station form Bridged Call Alerting? y

I use E & M | Tie | Wink-Start on the IPO side. And Tie (Trunk type Wink-Wink) on the Definity side. Joe

Each extension has to be loaded in the T-server under "Devices". This also includes VDNs that are being monitored. Also, the DN must match the user profile under the MY DN value or you will experience additional problems.

On the right side of the base, there is a dip-switch. I believe if it is set to one bar, it will answer the incoming call. The two bar setting selects another appearance. At least that is how the one I use is setup... Joe