Search results for query: *

Sure spent many hours in that load and also ld 96.

Go to ld 60 and type ssck 0. Then show your results. Also in ld 60 type in lcnt 2 for loop 2 show results.

Thanks Hawkgromit for the link.

I am looking for a version 7.x feature document. Would anyone know the title or document number that I can download ? For example I needed to make a feature change to a 9608 and chose restrict last appearance. What document would list or give me an explanation about these telephone features?

REQ: prt TYPE: TN TYPE TNB TN 144 0 03 11 SPWD DATE PAGE DES DES XXXX TN 144 0 03 11 VIRTUAL TYPE 1165 CDEN 8D CTYP XDLC CUST 0 NUID NHTN CFG_ZONE 00001 CUR_ZONE 00001 MRT ERL 0 ECL 0 FDN 3001 TGAR 1 LDN NO NCOS 7 SGRP 0 RNPG 0 SCI 0 SSU 0000 LNRS 16...

We have an Avaya Sip B179 conference phone with the same dn as an Avaya 1165. I can answer the call from the conference phone put it on hold and pick it up on the 1165. I can not do the reverse. When I answer the call from the 1165 and put it on hold I press the line button on the conference...

Google Nortel Hardware Replacement Guide. Page 102. This is a very tricky procedure.

Have you tried a cross over cable to your PC?

Thanks for the information it helped us a lot. Understanding how the idle line and bridged line programming works did the trick. We are going to work on installing cover answer groups in this department with add on modules. Thanks again.

We have noticed when you assign 2 bridged appearances of lets say ext 5123 on a 9608. When both appearances are in use on the phone you can not transfer one of the calls.You hit transfer and the call does not go on hold and a dial tone is not present to transfer the call. If I add a third...

Try updating firmware it was an issue with a customer of ours.

We have a BCM 50 4.0 and I was looking at CCR Tree 6 records.See attached.Is the report saying 165 calls were answered by home menu, 7 calls out of the 165 choose option 1, 116 callers chose option 2 ect.... I,m a little confused on the daily total calls. I can,t imagine there were 324 total...

About the lightning protection. They make co many types. If you can, try to find one that has a common type of connection to your MDF. If you MDF is 110 see if you can get a 200 pair terminal with lightning protection with a 110 type of connector.

Try Configuration telephony/ lines/ active VOIP Lines.

Lightning protection should be installed at both ends and grounded whether it is underground or on telephone poles. Call a local electrical or telecom supply company.

Are you connecting thru an SEB or Netpath. It says connecting to 1.

How many digits is the Telco sending 4 ,7, 10? You are trying to change the Public Received Field? And if busy is set to prime?

I also noticed you had hunt and fdn assigned you may want to chg cls fnd to fna htd to hta .

Log into Callpilot. Choose AA then Greeting Tables then change Greeting table 1. Is this a schedule you might want to assign or work on?

Putty does the same thing Not sure what port settings would need to be changed. With a pc running XP there is not a problem. I am able to connect to the OAI device with Windows 7 and can slowly navigate through the menus.